{"id":1034,"date":"2019-08-02T08:01:01","date_gmt":"2019-08-02T06:01:01","guid":{"rendered":"http:\/\/unmz-wp.e-bs.cz\/?page_id=1034"},"modified":"2019-08-02T08:01:01","modified_gmt":"2019-08-02T06:01:01","slug":"cast-a-note","status":"publish","type":"page","link":"https:\/\/unmz.gov.cz\/en\/obecne\/vestnik-unmz\/cast-a-oznameni\/","title":{"rendered":"PART A - NOTIFICATION"},"content":{"rendered":"
\n
\n

Section 2. Czech technical standards<\/span><\/b><\/p>\n<\/div>\n

\u00a0<\/b>NOTICE No 71\/19<\/b><\/p>\n

Office for Technical Standardization, Metrology and State Testing<\/b><\/p>\n

on the issue of CSNs, their amendments, corrections and cancellations<\/p>\n

The Office for Technical Standardization, Metrology and State Testing, pursuant to Section 4 of Act No. 22\/1997 Coll., announces that the following CSNs have been issued, amended, corrected or cancelled.<\/p>\n

The validity of CSNs, their amendments and corrections generally begins on the first day of the month following the month of issue, unless otherwise specified.<\/p>\n

Standards marked
\n*) adopt international or European standards by adopting the original.<\/p>\n

For amendments and corrections that change the title of the standard and are issued under a changed title, the new title is given first. In such cases, the original title of the standard is given in brackets for information.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

ISSUED CSN<\/b><\/p>\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

1. \u010cSN ISO 14827-3<\/b> (01\u00a08270)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508146<\/p>\n<\/td>\n

\n

Traffic Information
\nand control systems - Data interfaces between traffic information centres and
\ncontrol systems - Part 3: XML data interfaces (Profile A) between
\nIntelligent Transport Systems (ITS) centres<\/b> *); Release date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

2. \u010cSN ISO 29281-2<\/b> (01\u00a08405)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508049<\/p>\n<\/td>\n

\n

Smart
\nTransport systems - Local roads - Part 2: Support for existing systems<\/b>*);
\nRelease date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CHSN ISO 29281-2 (01 8405)<\/p>\n<\/td>\n

\n

Intelligent Transport Systems - Communication Infrastructure
\nfor Land Mobile Equipment (CALM) - Connecting CALM to a non-IP network - Part 2:
\nSupport for existing communication interfaces in use; Release: November 2013<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

3. HCN EN ISO 2085<\/b> (03\u00a08650)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508174<\/p>\n<\/td>\n

\n

Anodic oxidation
\nAluminium and its alloys - Continuity control of thin anodic oxide
\nCoatings - Copper sulphate test<\/b>; (idt ISO 2085:2018); Issue: August
\n2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 2085 (03 8650)<\/p>\n<\/td>\n

\n

Anodic oxidation of aluminium and its alloys - Control
\ncontext of thin anodic oxide coatings - Copper sulphate test;
\nAnnounced: April 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

4. HCN EN ISO 3211<\/b> (03\u00a08650)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508175<\/p>\n<\/td>\n

\n

Anodic oxidation
\nAluminium and its alloys - Assessment of the resistance of anodic oxide coatings
\nagainst cracking during deformation<\/b>; (idt ISO 3211:2018); Issue: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 3211 (03 8650)<\/p>\n<\/td>\n

\n

Anodic oxidation of aluminium and its alloys - Determination
\nResistance of anodic oxide coatings to deformation cracking; Issue:
\nFebruary 2011<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

5. HCN EN ISO 8994<\/b> (03\u00a08650)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508209<\/p>\n<\/td>\n

\n

Anodic oxidation
\nAluminium and its alloys - Corrosion point evaluation system - Grid method<\/b>;
\n(idt ISO 8994:2018); Issue: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 8994 (03 8650)<\/p>\n<\/td>\n

\n

Anodic oxidation of aluminium and its alloys - Evaluation system
\nPoint corrosion - Grid method; Issue: August 2011<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

6. HCN EN ISO 14114<\/b> (05\u00a02122)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507781<\/p>\n<\/td>\n

\n

Equipment for
\nflame welding - Acetylene distribution systems for welding, cutting and
\nRelated processes - General requirements<\/b>; (idt ISO 14114:2017); Issue: August
\n2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 14114 (05 2122)<\/p>\n<\/td>\n

\n

Flame welding equipment - Acetylene distributors
\nSystems for welding, cutting and related processes - General requirements;
\nAnnounced: August 2018<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

7. \u010cSN EN IEC 60974-14<\/b> (05\u00a02205)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508034<\/p>\n<\/td>\n

\n

Equipment for
\nArc welding - Part 14: Calibration, validation and consistency testing<\/b>;
\nRelease date: August 2019<\/p>\n

With effect from 2021-11-23 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 50504 (05 2203)<\/p>\n<\/td>\n

\n

Arc welding equipment validation; Announced:
\nJanuary 2009<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

8. \u010cSN EN 12645<\/b> (25\u00a07013)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 505657<\/p>\n<\/td>\n

\n

Pressure gauges in
\nTyres - Instruments for checking pressure and\/or inflation\/deflation
\nMotor vehicle tyres - Metrology, requirements and testing<\/b>; Issue:
\nAugust 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 12645 (25 7013)<\/p>\n<\/td>\n

\n

Tyre Pressure Gauges - Instruments for checking
\nPressure and\/or inflation of motor vehicle tyres - Metrology, requirements and
\nTesting; Announced: July 2015<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

9. \u010cSN ISO 1070<\/b> (25\u00a09315)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508057<\/p>\n<\/td>\n

\n

Hydrometry -
\nSlope and area method<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN ISO 1070 (25 9315)<\/p>\n<\/td>\n

\n

Measurement of fluid flow in open channels. Method
\nslope and area; Issue: June 1994<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

10. \u010cSN EN 81-28+AC<\/b> (27\u00a04003)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507132<\/p>\n<\/td>\n

\n

Security
\nregulations for the design and installation of lifts - Lifts for the transport of persons and goods -
\nPart 28: Remote emergency signalling for lifts intended for the transport of persons and
\npeople and costs<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 81-28 (27 4003)<\/p>\n<\/td>\n

\n

Safety regulations for the construction and installation of lifts -
\nLifts for the transport of persons and goods - Part 28: Remote emergency signalling for
\nlifts intended for the transport of persons and goods; Issue: February 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

11. \u010cSN EN 81-71+AC<\/b> (27\u00a04003)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507133<\/p>\n<\/td>\n

\n

Security
\nRegulations for the construction and installation of lifts - Special modifications of lifts intended for
\ntransport of persons and goods - Part 71: Vandal-resistant lifts<\/b>; Issue:
\nAugust 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 81-71 (27 4003)<\/p>\n<\/td>\n

\n

Safety regulations for the construction and installation of lifts -
\nSpecial arrangements for lifts intended for the transport of persons and goods - Part 71:
\nVandal-resistant lifts; Issue: March 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

With effect from 2020-05-31 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 81-71+A1 (27 4003)<\/p>\n<\/td>\n

\n

Safety regulations for the construction and installation of lifts -
\nSpecial arrangements for lifts for the transport of persons and goods - Part 71:
\nVandal resistant lifts; Issue: July 2007<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

12. \u010cSN ISO 20035<\/b> (30\u00a00650)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508024<\/p>\n<\/td>\n

\n

Smart
\nTransport Systems - Cooperative Adaptive Cruise Control (CACC) Systems -
\nFunctional requirements and test procedures<\/b>*); Release date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

13. \u010cSN ISO 22241-1<\/b> (30\u00a02460)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507989<\/p>\n<\/td>\n

\n

Diesel engines -
\nNOx reducing agent, aqueous urea solution (AUS 32) - Part 1: Requirements
\non quality<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>HSN ISO 22241-1 (30 2460)<\/p>\n<\/td>\n

\n

Diesel engines - NOx reduction reagent, aqueous solution
\nUrea (AUS 32) - Part 1: Quality requirements; Issue: February 2016<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

14. HCN EN ISO 10087<\/b> (32\u00a01020)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508204<\/p>\n<\/td>\n

\n

Small vessels -
\nVessel identification - Coding system<\/b>; (idt ISO 10087:2019); Issue:
\nAugust 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 10087 (32 1020)<\/p>\n<\/td>\n

\n

Small craft - Hull identification - Code
\nSystem; Release: November 2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

15. CHSN IEC 60050-821<\/b> (33\u00a00050)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 505799<\/p>\n<\/td>\n

\n

International
\nelectrical engineering dictionary - Chapter 821: Railway signalling and signalling equipment
\nfacilities<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CCN IEC 60050-821 (33 0050)<\/p>\n<\/td>\n

\n

International Electrotechnical Dictionary - Chapter 821:
\nRailway signalling and signalling equipment; Issue: December 2002<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

16. CSN 33 2000-5-56 ed. 3<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508172<\/p>\n<\/td>\n

\n

Electric
\nLow-voltage installations - Part 5-56: Selection and construction of electrical installations -
\nEquipment for security purposes<\/b>; (idt HD 60364-5-56:2018); (idt IEC 60364-5-5-56:2018);
\nRelease date: August 2019<\/p>\n

With effect from 2021-12-07 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN 33 2000-5-56 ed. 2<\/p>\n<\/td>\n

\n

Low-voltage electrical installations - Part 5-56: Selection and
\nConstruction of electrical installations - Equipment for safety purposes; Issue: October
\n2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

17. EN IEC 60079-15 ed. 4<\/b>
\n(33\u00a02320)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508137<\/p>\n<\/td>\n

\n

Explosive atmospheres -
\nPart 15: Equipment protected by protection type 'n'<\/b>; (idt IEC 60079-15:2017); Issue:
\nAugust 2019<\/p>\n

With effect from 2022-04-19 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 60079-15 ed. 3 (33 2320)<\/p>\n<\/td>\n

\n

Explosive atmospheres - Part 15: Type-protected equipment
\nProtection \"n\"; Release: December 2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

18. EN IEC 61000-3-2 ed. 5<\/b>
\n(33\u00a03432)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508010<\/p>\n<\/td>\n

\n

Electromagnetic
\nCompatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
\n(devices with input phase current \u2264 16 A)<\/b>; (idt IEC
\n61000-3-2:2018); Issue: August 2019<\/p>\n

With effect from 2022-03-01 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN EN 61000-3-2 ed. 4 (33 3432)<\/p>\n<\/td>\n

\n

Electromagnetic compatibility (EMC) - Part 3-2: Limits -
\nLimits for harmonic current emission (devices with input phase current \u2264
\n16 A); Issue: March 2015<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

19. EN IEC 60674-3-2 ed. 2<\/b>
\n(34\u00a06573)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508163<\/p>\n<\/td>\n

\n

Specifications
\nPlastic films for electrical purposes - Part 3: Specifications
\nindividual materials - Sheet 2: Requirements for biaxially balanced
\noriented polyethylene terephthalate (PET) film used for
\nfor electrical insulation purposes<\/b>*); (idt IEC 60674-3-2:2019); Issue: August 2019<\/p>\n

With effect from 2022-06-14 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 60674-3-2 (34 6573)<\/p>\n<\/td>\n

\n

Plastic films for electrical purposes - Part 3:
\nSpecifications for individual materials - Sheet 2: Requirements for balanced biaxial
\noriented polyethylene terephthalate (PET) film used for
\nfor electrical insulation purposes; Issue: January 1999<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

20. EN IEC 61051-1 ed. 2<\/b>
\n(35\u00a08080)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508135<\/p>\n<\/td>\n

\n

Varistors for
\nuse in electronic devices - Part 1: Generic specification<\/b>*); (idt
\nIEC 61051-1:2018); Issue: August 2019<\/p>\n

With effect from 2021-12-03 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 61051-1 (35 8080)<\/p>\n<\/td>\n

\n

Varistors for use in electronic equipment - Part 1:
\nTribal specification; Announced: July 2009<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

21. EN IEC 60793-2-50 ed. 6<\/b>
\n(35\u00a09213)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508050<\/p>\n<\/td>\n

\n

Optical fibres -
\nPart 2-50: Product specification - Sub-specification for monofilaments
\nClass B<\/b>*); (idt IEC 60793-2-50:2018); Issue: August 2019<\/p>\n

With effect from 2022-01-18 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 60793-2-50 edition 5 (35 9213)<\/p>\n<\/td>\n

\n

Optical fibres - Part 2-50: Product specification - Subparts
\nSpecification for single-mode Class B fibres; Issue: July 2016<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

22. \u010cSN EN IEC 62149-10<\/b>
\n(35\u00a09276)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508058<\/p>\n<\/td>\n

\n

Fibre optic
\nActive components and devices - Performance standards - Part 10: Transceivers
\nRoF (radio on optical fibre) for mobile fronthaul<\/b>*); (idt IEC
\n62149-10:2018); Issue: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

23. EN IEC 60601-2-16 ed. 3<\/b>
\n(36\u00a04801)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508029<\/p>\n<\/td>\n

\n

Medical
\nElectrical apparatus - Part 2-16: Particular requirements for basic safety and
\nthe necessary functionality of haemodialysis, haemodiafiltration and haemofiltration
\ninstruments<\/b>; (idt IEC 60601-2-16:2018); Issue: August 2019<\/p>\n

With effect from 2022-05-24 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 60601-2-16 ed. 2 (36 4801)<\/p>\n<\/td>\n

\n

Medical electrical apparatus - Part 2-16: Particular
\nrequirements for basic safety and essential functionality of hemodialysis,
\nhemodiafiltration and hemofiltration devices; Issue: January 2016<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

24. EN IEC 80601-2-30 ed. 2<\/b>
\n(36\u00a04801)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508027<\/p>\n<\/td>\n

\n

Medical
\nElectrical apparatus - Part 2-30: Particular requirements for basic safety and
\nthe necessary functionality of automated non-invasive tonometers<\/b>; (idt
\nIEC\u00a0 <\/span>80601-2-30:2018); Issue: August 2019<\/p>\n

With effect from 2022-05-24 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 80601-2-30 (36 4801)<\/p>\n<\/td>\n

\n

Medical electrical apparatus - Part 2-30: Particular
\nrequirements for basic safety and essential functionality of automated
\nnon-invasive sphygmomanometers; Issue: May 2011<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

25. EN IEC 60601-2-39 ed. 3<\/b>
\n(36\u00a04801)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508025<\/p>\n<\/td>\n

\n

Medical
\nElectrical apparatus - Part 2-39: Particular requirements for basic safety and
\nthe necessary functionality of peritoneal dialysis machines<\/b>; (idt IEC
\n60601-2-39:2018); Release date: August 2019<\/p>\n

With effect from 2022-05-24 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 60601-2-39 ed. 2 (36 4801)<\/p>\n<\/td>\n

\n

Medical electrical equipment - Part 2-39: Particular
\nthe requirements for basic safety and the necessary functionality of apparatus for
\nperitoneal dialysis; Issue: December 2008<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

26. CHSN ISO\/IEC 20924<\/b> (36\u00a09020)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508014<\/p>\n<\/td>\n

\n

Internet of Things (IoT)
\n- Dictionary<\/b>; Release date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

27. \u010cSN ISO 7112<\/b> (47\u00a06010)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508153<\/p>\n<\/td>\n

\n

Forestry machinery -
\nPortable brushcutters and grass trimmers - Glossary<\/b>; Release date: August
\n2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN ISO 7112 (47 6010)<\/p>\n<\/td>\n

\n

Forestry Machinery - Portable brush cutters and grass trimmers
\nGlossary; Issue: December 2017<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

28. EN ISO 6887-4<\/b> (56\u00a00102)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508133<\/p>\n<\/td>\n

\n

Microbiology
\nFood chain - Preparation of analytical samples, initial suspension and
\n10-fold dilutions for microbiological testing - Part 4: Specific
\ninstructions for different products<\/b>; (idt ISO 6887-4:2017); Issue: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 6887-4 (56 0102)<\/p>\n<\/td>\n

\n

Microbiology of the food chain - Modification of analytical
\nsamples, preparation of initial suspension and tenfold dilutions for
\nMicrobiological testing - Part 4: Specific rules for different products;
\nAnnounced: October 2017<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

29TH CSN ISO 48-2<\/b> (62\u00a01433)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508043<\/p>\n<\/td>\n

\n

Rubber, vulcanised
\nor thermoplastic elastomer - Determination of hardness - Part 2: Hardness between 10
\nIRHD and 100 IRHD<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN ISO 48 (62 1433)<\/p>\n<\/td>\n

\n

Rubber, vulcanised or thermoplastic elastomer -
\nHardness determination (hardness between 10 IRHD and 100 IRHD); Issue: November 2011<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

30. ART. EN 1762<\/b> (63\u00a05440)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508045<\/p>\n<\/td>\n

\n

Rubber hoses and
\nhoses with end caps for liquefied petroleum gases, LPG (liquid or gaseous
\nphase) and natural gas up to 25 bar (2,5 MPa) - Specifications<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 1762 (63 5440)<\/p>\n<\/td>\n

\n

Rubber hoses and hoses with end caps for liquefied petroleum
\nLPG (liquid or gas phase) and natural gas up to 25 bar (2.5 MPa) -
\nSpecifications; Release: August 2017<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

31. \u010cSN EN 438-2+A1<\/b> (64\u00a07501)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508044<\/p>\n<\/td>\n

\n

High Pressure
\ndecorative laminates (HPL) - Boards based on reactive plastics (usually called
\nLaminates) - Part 2: Determination of properties<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 438-2 (64 7501)<\/p>\n<\/td>\n

\n

High Pressure Decorative Laminates (HPL) - Baseboards
\nreactoplasts (commonly called laminates) - Part 2: Determination of properties;
\nRelease date: September 2016<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

32. EN 589<\/b> (65\u00a06503)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508150<\/p>\n<\/td>\n

\n

Motor fuels -
\nLiquefied petroleum gases (LPG) - Technical requirements and test methods<\/b>;
\nRelease date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 589+A1 (65 6503)<\/p>\n<\/td>\n

\n

Motor Fuels - Liquefied Petroleum Gases (LPG) - Technical
\nRequirements and test methods; Issue: October 2012<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

33. \u010cSN EN 16140<\/b> (72\u00a01190)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508134<\/p>\n<\/td>\n

\n

Test methods
\nNatural stone - Determination of sensitivity to changes in appearance caused by thermal
\ncycles<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 16140 (72 1190)<\/p>\n<\/td>\n

\n

Test methods for natural stone - Determination of sensitivity
\nfor changes in appearance caused by thermal cycles; Announced: July 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

34. CSN EN 13369 ed. 2<\/b> (72\u00a03001)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508040<\/p>\n<\/td>\n

\n

Common provisions
\nfor precast concrete<\/b>; Release date: August 2019<\/p>\n

With effect from 2021-04-30 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 13369 (72 3001)<\/p>\n<\/td>\n

\n

Common provisions for precast concrete products; Edition:
\nNovember 2013<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN EN 13369 ed. 2 (72 3001)<\/p>\n<\/td>\n

\n

Common provisions for precast concrete; Promulgated:
\nOctober 2018<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

35. HSN EN ISO 12631<\/b> (73\u00a00321)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507788<\/p>\n<\/td>\n

\n

Thermal behaviour
\nlightweight envelopes - Calculation of the heat transfer coefficient<\/b>; (idt ISO
\n12631:2017); Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 12631 (73 0321)<\/p>\n<\/td>\n

\n

Thermal behaviour of lightweight envelopes - Calculation
\nheat transfer coefficient; Announced: March 2018<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

36. HSN EN ISO 7345<\/b> (73\u00a00553)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507789<\/p>\n<\/td>\n

\n

Thermal behaviour
\nBuildings and Building Components - Physical quantities and definitions<\/b>; (idt ISO
\n7345:2018); Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 7345 (73 0553)<\/p>\n<\/td>\n

\n

Thermal behaviour of buildings and building components - Physical
\nquantities and definitions; Announced: October 2018<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

37. EN 17037<\/b> (73\u00a00582)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508154<\/p>\n<\/td>\n

\n

Day lighting
\nbuildings<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN 73 0581<\/p>\n<\/td>\n

\n

Illumination of buildings and outdoor spaces - Method of determination
\nvalues; Release date: September 2009<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 17037 (73 0582)<\/p>\n<\/td>\n

\n

Daylighting in buildings; Announced: May 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

38. EN 1364-5<\/b> (73\u00a00853)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508143<\/p>\n<\/td>\n

\n

Fire testing
\nResistance of non-load bearing elements - Part 5: Ventilation grilles<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 1364-5 (73 0853)<\/p>\n<\/td>\n

\n

Fire resistance testing of non-load bearing members - Part 5:
\nVentilation grilles; Announced: October 2017<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

39. \u010cSN EN 15882-1+A1<\/b> (73\u00a00856)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508144<\/p>\n<\/td>\n

\n

Extended application
\nResults of tests on the fire resistance of service installations - Part 1: Fire performance
\ndurable air ducts<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 15882-1+A1 (73 0856)<\/p>\n<\/td>\n

\n

Extended application of fire resistance test results
\nservice installations - Part 1: Fire-resistant air ducts;
\nAnnounced: February 2018<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

40. EN 1090-4<\/b> (73\u00a02601)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508064<\/p>\n<\/td>\n

\n

Implementation of steel
\nand aluminium structures - Part 4: Technical requirements for cold-rolled steel
\nshaped elements and structures for use in roofs, ceilings, floors and
\nWalls<\/b>; Release date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 1090-4 (73 2601)<\/p>\n<\/td>\n

\n

Execution of steel and aluminium structures - Part 4:
\nTechnical requirements for cold-formed steel members and structures for
\nuse in roofs, ceilings, floors and walls; Announced: December 2018<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

41. EN 14702-3<\/b> (75\u00a08060)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508168<\/p>\n<\/td>\n

\n

Characterisation of sludge
\n- Settling properties - Part 3: Determination of zonal settling velocity (ZSV)<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

42. EN ISO 11393-1<\/b> (83\u00a02770)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508165<\/p>\n<\/td>\n

\n

Protective clothing for
\nusers of hand-held chainsaws - Part 1: Test equipment for testing
\nresistance to chainsaw cuts<\/b>; (idt ISO 11393-1:2018); Issue:
\nAugust 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 11393-1 (83 2770)<\/p>\n<\/td>\n

\n

Protective clothing for users of hand-held chainsaws - Part
\n1: Chainsaw cut resistance test equipment;
\nAnnounced: April 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

43. EN ISO 11393-3<\/b> (83\u00a02770)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508166<\/p>\n<\/td>\n

\n

Protective clothing for
\nusers of hand-held chainsaws - Part 3: Test methods for footwear<\/b>; (idt
\nISO 11393-3:2018); Issue: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 11393-3 (83 2770)<\/p>\n<\/td>\n

\n

Protective clothing for users of hand-held chainsaws - Part
\n3: Test methods for footwear; Announced: April 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

44. \u010cSN EN 16121+A1<\/b> (91\u00a00414)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507994<\/p>\n<\/td>\n

\n

Non-residential storage
\nFurniture - Requirements for safety, strength, durability and stability<\/b>;
\nRelease date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>\u010cSN EN 16121+A1 (91 0414)<\/p>\n<\/td>\n

\n

Non-domestic storage furniture - Safety requirements,
\nstrength, durability and stability; Announced: March 2018<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

CHANGES TO CSN<\/b><\/p>\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

45. HSN ISO 24534-5<\/b> (01\u00a08350)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508053<\/p>\n<\/td>\n

\n

Automatic
\nIdentification of vehicles, equipment and cargo - Electronic identification
\nVehicle registration (ERI) - Part 5: Application layer security using
\nsymmetric encryption<\/b>; Release date: June 2012<\/p>\n

Change Amd. 1<\/b>*);
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

46. EN 81-71+A1<\/b> (27\u00a04003)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508019<\/p>\n<\/td>\n

\n

Security
\nRegulations for the construction and installation of lifts - Special regulations for lifts for
\ntransport of persons and goods - Part 71: Vandal-resistant lifts<\/b>; Issue:
\nJuly 2007<\/p>\n

Change Z2<\/b>;
\nRelease date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

Amendment Z1; Issue: March 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

47. CCN IEC 60050-617<\/b> (33\u00a00050)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508170<\/p>\n<\/td>\n

\n

International
\nelectrical dictionary - Part 617: Electricity market<\/b>; Release date: May
\n2011<\/p>\n

Change A3<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

48. CCN IEC 50(691)<\/b> (33\u00a00050)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508052<\/p>\n<\/td>\n

\n

International
\nelectrical dictionary - Chapter 691: Electricity tariffs<\/b>; Issue:
\nFebruary 1997<\/p>\n

Change A1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

49. CSN EN 50438 ed. 2<\/b> (33\u00a00127)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508008<\/p>\n<\/td>\n

\n

Requirements for
\nparallel connection of microgenerators with public low-voltage distribution networks
\nVoltage<\/b>; Release date: September 2014<\/p>\n

Change Z2<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

50. CSN 33 2000-5-56 ed. 2<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508173<\/p>\n<\/td>\n

\n

Electric
\nLow-voltage installations - Part 5-56: Selection and construction of electrical installations -
\nEquipment for security purposes<\/b>; Release date: October 2010<\/p>\n

Change Z4<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

51. EN 60079-15 ed. 3<\/b>
\n(33\u00a02320)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508138<\/p>\n<\/td>\n

\n

Explosive atmospheres -
\nPart 15: Equipment protected by protection type 'n'<\/b>; Issue: December 2010<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

52. CSN EN 61000-3-2 ed. 4<\/b>
\n(33\u00a03432)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508011<\/p>\n<\/td>\n

\n

Electromagnetic
\nCompatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
\n(devices with input phase current \u2264 16 A);<\/b> Release date: March 2015<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

53. CCN IEC 50(161)<\/b> (33\u00a04201)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508009<\/p>\n<\/td>\n

\n

International
\nelectrotechnical dictionary - Chapter 161: Electromagnetic compatibility<\/b>;
\nIssue: December 1993<\/p>\n

Change A8<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

54. EN 60674-3-2<\/b> (34\u00a06573)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508164<\/p>\n<\/td>\n

\n

Plastic films for
\nElectrotechnical applications - Part 3: Specifications for individual materials - Sheet 2:
\nRequirements for balanced biaxially oriented polyethylene terephthalate (PET)
\nfoil used for electrical insulation purposes<\/b>; Issue: January 1999<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

55. EN 60947-4-1 ed. 3<\/b>
\n(35\u00a04101)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508188<\/p>\n<\/td>\n

\n

Switching and control
\nLow-voltage apparatus - Part 4-1: Contactors and motor starters - Part 4-1: Motor starters
\nElectromechanical contactors and motor starters<\/b>; Issue: December 2010<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

56. CSN EN 60793-2-50 ed. 5<\/b>
\n(35\u00a09213)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508051<\/p>\n<\/td>\n

\n

Optical fibres -
\nPart 2-50: Product specification - Sub-specification for monofilaments
\nClass B<\/b>; Release date: July 2016<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

57. CSN 36 0011-1<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508155<\/p>\n<\/td>\n

\n

Lighting measurement
\nPremises - Part 1: Basic provisions<\/b>; Release date: February 2014<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

58. CSN 36 0011-2<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508156<\/p>\n<\/td>\n

\n

Lighting measurement
\nPremises - Part 2: Daylighting measurements<\/b>; Release date: February 2014<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

59. CSN 36 0020<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508157<\/p>\n<\/td>\n

\n

Associated lighting<\/b>;
\nRelease date: January 2015<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

60. CSN EN 60188 ed. 2<\/b> (36\u00a00230)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508047<\/p>\n<\/td>\n

\n

High pressure mercury
\nDischarge lamps - Performance requirements<\/b>; Issue: March 2002<\/p>\n

Amendment A11<\/b>*);
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

61. EN 60601-2-16 ed. 2<\/b>
\n(36\u00a04801)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508030<\/p>\n<\/td>\n

\n

Medical
\nElectrical apparatus - Part 2-16: Particular requirements for basic safety and
\nthe necessary functionality of haemodialysis, haemodiafiltration and haemofiltration
\ninstruments<\/b>; Release date: January 2016<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

62. EN 80601-2-30<\/b> (36\u00a04801)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508028<\/p>\n<\/td>\n

\n

Medical
\nElectrical apparatus - Part 2-30: Particular requirements for basic safety and
\nthe necessary functionality of automated non-invasive sphygmomanometers<\/b>;
\nRelease date: May 2011<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

63. EN 60601-2-39 ed. 2<\/b>
\n(36\u00a04801)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508026<\/p>\n<\/td>\n

\n

Medical
\nElectrical apparatus - Part 2-39: Particular requirements for basic safety and
\nthe necessary functionality of peritoneal dialysis machines<\/b>; Issue: December
\n2008<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

64. EN ISO 472<\/b> (64\u00a00001)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508042<\/p>\n<\/td>\n

\n

Plastics - Glossary<\/b>;
\nRelease date: October 2015<\/p>\n

Change A1<\/b>; (idt
\nISO 472:2013\/Amd.1:2018); Issue: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

65. EN 13369<\/b> (72\u00a03001)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508152<\/p>\n<\/td>\n

\n

Common provisions
\nfor precast concrete<\/b>; Release date: November 2013<\/p>\n

Change Z2<\/b>;
\nRelease date: August 2019<\/p>\n

Its issuance cancels<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

Amendment Z1; Issue: October 2018<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

66. CSN 73 0580-1<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508159<\/p>\n<\/td>\n

\n

Day lighting
\nbuildings - Part 1: Basic requirements<\/b>; Release date: June 2007<\/p>\n

Change Z3<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

67. CSN 73 0580-2<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508160<\/p>\n<\/td>\n

\n

Day lighting
\nBuildings - Part 2: Daylighting in residential buildings<\/b>; Release date: June 2007<\/p>\n

Change Z1<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

68. CSN 73 0580-3<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508161<\/p>\n<\/td>\n

\n

Day lighting
\nBuildings - Part 3: Daylighting in schools<\/b>; Issue: September 1994<\/p>\n

Change Z3<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

69. CSN 73 0580-4<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508162<\/p>\n<\/td>\n

\n

Day lighting
\nBuildings - Part 4: Daylighting in industrial buildings<\/b>; Issue: September 1994<\/p>\n

Change Z3<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

70. \u010cSN 73 4301<\/b><\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508158<\/p>\n<\/td>\n

\n

Residential buildings<\/b>;
\nRelease date: June 2004<\/p>\n

Change Z4<\/b>;
\nRelease date: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

71. EN ISO 10079-1 ed. 2<\/b>
\n(85\u00a02703)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508048<\/p>\n<\/td>\n

\n

Medical
\nExtraction equipment - Part 1: Electric extraction equipment<\/b>; Release date: June
\n2016<\/p>\n

Change A1<\/b>; (idt
\nISO 10079-1:2015\/Amd.1:2018); Issue: August 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

REPAIRS CSN<\/b><\/p>\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

72. EN 50463-2 ed. 2<\/b>
\n(34\u00a01566)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508169<\/p>\n<\/td>\n

\n

Railway equipment -
\nEnergy measurement on board a train - Part 2: Energy measurement<\/b>; Issue:
\nApril 2018<\/p>\n

Correction 1<\/b>;
\nIssue: August 2019 (Correction is in print)<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

CANCELLED CSN<\/b><\/p>\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

73.<\/b> EN IEC 60335-2-76 ed. 3
\n(36\u00a01050)<\/p>\n<\/td>\n

\n

Household and similar electrical appliances -
\nSafety - Part 2-76: Particular requirements for power sources for electrical
\nFencing; Issue: May 2019; Cancelled as of 2019-09-01<\/p>\n

Its abolition shall abolish<\/p>\n

EN 60335-2-76 ed. 2 Amendment Z1; Issue May 2019; Revoked
\nk 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

74.<\/b> CHSN ISO 22004 (56 9610)<\/p>\n<\/td>\n

\n

Food safety management systems - Instructions for use
\nISO 22000; Issue: October 2015; Revoked as of 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Czech Agency for
\nstandardization<\/p>\n

Director of the Department
\nStandardization<\/p>\n

Zde\u0148ka Slan\u00e1<\/b> v. r.<\/p>\n

NOTICE No 72\/19<\/b><\/p>\n

Office for Technical Standardization, Metrology and State Testing<\/b><\/p>\n

information on
\napproval of European standards for direct use as CSN<\/p>\n

Office for
\ntechnical standardisation, metrology and state testing pursuant to Section 4 of Act No.
\n22\/1997 Coll. announces that the English versions of the following European standards have been
\napproved for direct use as CSN.<\/p>\n

Note:<\/b><\/p>\n

If the
\nthe term \"harmonized standard\" is given in the name of the CSN, it is the Czech
\nthe translation of this term in the title of the European standard being transposed
\n(telecommunications line). In the Czech Republic, this CSN will become harmonized in
\nwithin the meaning of \u00a7 4a of Act No. 22\/1997\/Sb., on technical requirements for products and on
\namendment and supplementation of certain acts, as amended by Act No. 71\/2000 Coll., on the basis of
\npublication of the relevant European standard as harmonised in the Official Journal
\nEuropean Communities.<\/p>\n

This fact
\nThe Office for Technical Standardization, Metrology and State Testing shall announce in
\nBulletin of the Office for Technical Standardization, Metrology and State Testing with
\nindicating the technical regulation of the Czech Republic to which this standard refers
\nCovered.<\/p>\n

For standards and amendments marked +)<\/sup> is being prepared
\ntaking over by translation.<\/p>\n

For amendments and corrections that change the title of the standard and are issued
\nalready under a changed name, the new name is given in the first place. The original name
\nof the standard is given in brackets in these cases for information.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

EVROPSK\u00c9\u00a0 <\/span>NORMS
\n<\/span>APPROVED\u00a0 <\/span>K\u00a0 <\/span>DIRECT
\n<\/span>USING\u00a0 <\/span>AS\u00a0 <\/span>CSN<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

1. \u010cSN EN 17161<\/b> (01\u00a00393)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507369<\/p>\n<\/td>\n

\n

Design for all
\n- Availability of products, goods and services under the Design for All approach -
\nExtending the range of users<\/b>; EN 17161:2019; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

2. EN ISO 4869-1<\/b> (01\u00a01640)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507375<\/p>\n<\/td>\n

\n

Acoustics - Protectors
\nHearing aids - Part 1: Subjective method for measuring insertion loss<\/b>; EN ISO
\n4869-1:2018; ISO 4869-1:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN ISO 4869-1 (01 1640)<\/p>\n<\/td>\n

\n

Acoustics. Hearing protectors. Part 1: Subjective method
\nmeasurement of insertion loss; Issue: January 1993<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

3. EN ISO 4869-2<\/b> (01\u00a01640)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507376<\/p>\n<\/td>\n

\n

Acoustics - Protectors
\nHearing aids - Part 2: Estimation of sound pressure levels A behind the fitted ear defender
\nHearing Aid<\/b>; EN ISO 4869-2:2018; ISO 4869-2:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN ISO 4869-2 (01 1640)<\/p>\n<\/td>\n

\n

Acoustics. Hearing protectors -\u00a0 <\/span>Part 2: Estimation of sound pressure levels A for
\nhearing protector in place; Issue: February 1996<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

4. HCN EN ISO 7779<\/b> (01\u00a01652)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507372<\/p>\n<\/td>\n

\n

Acoustics - Measurements
\nairborne noise emitted by information technology equipment and
\nTelecommunications<\/b>; EN ISO 7779:2018; ISO 7779:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 7779 (01 1652)<\/p>\n<\/td>\n

\n

Acoustics - Measurement of airborne, radiated noise
\ninformation technology and telecommunications equipment; Issue: December 2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

5. EN ISO 17201-1<\/b> (01\u00a01690)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507373<\/p>\n<\/td>\n

\n

Acoustics - Noise
\nRifle ranges - Part 1: Determination of muzzle blast noise by measurement<\/b>; EN
\nISO 17201-1:2018; ISO 17201-1:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 17201-1 (01 1690)<\/p>\n<\/td>\n

\n

Acoustics - Rifle range noise - Part 1: Determination of shot noise at
\nMouth of the barrel by measurement; Issue: February 2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

6. \u010cSN EN 17120<\/b> (01\u00a02074)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507371<\/p>\n<\/td>\n

\n

Photocatalysis -
\nWater purification - Performance measurement of photocatalytic materials using
\nphenol degradation<\/b>; EN 17120:2019; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

7. CCN EN ISO 11148-13<\/b> (23\u00a09060)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507382<\/p>\n<\/td>\n

\n

Non-electric handheld
\nTools - Safety requirements - Part 13: Striking tools<\/b>+)<\/sup>;
\nEN ISO 11148-13:2018; ISO 11148-13:2017; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

8. \u010cSN EN 1434-5+A1<\/b> (25\u00a08511)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507383<\/p>\n<\/td>\n

\n

Heat Meters -
\nPart 5: Tests for initial verification<\/b>+)<\/sup>; EN 1434-5:2015+A1:2019;
\nValid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 1434-5 (25 8511)<\/p>\n<\/td>\n

\n

Heat meters - Part 5: Tests for initial verification;
\nAnnounced: May 2016<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

9. \u010cSN EN 1434-6+A1<\/b> (25\u00a08511)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507384<\/p>\n<\/td>\n

\n

Heat Meters -
\nPart 6: Installation, commissioning, monitoring and maintenance<\/b>+)<\/sup>;
\nEN 1434-6:2015+A1:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 1434-6 (25 8511)<\/p>\n<\/td>\n

\n

Heat meters - Part 6: Installation, commissioning,
\nactivity monitoring and maintenance; Announced: May 2016<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

10. \u010cSN EN 16842-9<\/b> (26\u00a08818)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507385<\/p>\n<\/td>\n

\n

Motorised trolleys -
\nVisibility - Test methods and verification - Part 9: Loading trailers, side
\nand front stacking trolleys with raised operator position<\/b>; EN 16842-9:2019;
\nValid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

11. \u010cSN EN 14033-4<\/b> (28\u00a01005)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507386<\/p>\n<\/td>\n

\n

Railway applications
\n- Railway applications - Railway construction and maintenance machines - Part 4: Technical requirements
\nfor driving, moving and working on urban rail systems<\/b>;
\nEN 14033-4:2019; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

12. EN ISO 15118-4<\/b> (30\u00a00559)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507387<\/p>\n<\/td>\n

\n

Road vehicles -
\nVehicle to grid communication interface - Part 4: Conformity test
\nnetwork and application protocol<\/b>; EN ISO 15118-4:2019; ISO 15118-4:2018;
\nValid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

13. EN ISO 15118-5<\/b> (30\u00a00559)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507388<\/p>\n<\/td>\n

\n

Road vehicles -
\nVehicle-to-grid communication interfaces - Part 5: Test for physical conformity
\nlayers and data layers<\/b>; EN ISO 15118-5:2019; ISO 15118-5:2018; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

14. EN ISO 15118-8<\/b> (30\u00a00559)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507389<\/p>\n<\/td>\n

\n

Road vehicles -
\nVehicle-to-grid communication interfaces - Part 8: Physical requirements
\nlayer and a data layer for wireless communication<\/b>; EN ISO 15118-8:2019;
\nISO 15118-8:2018; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

15. \u010cSN EN 4859<\/b> (31\u00a03011)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507391<\/p>\n<\/td>\n

\n

Aviation and
\nAerospace - Sensor-based clamp load determination for bolts with
\nhigh tensile strength - Technical Specifications<\/b>; EN 4859:2019; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

16. \u010cSN EN 2288<\/b> (31\u00a04863)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507390<\/p>\n<\/td>\n

\n

Aviation and
\nAerospace - Bearing bushings with stainless steel flange with
\nself-lubricating lining - Dimensions and load capacities<\/b>; EN 2288:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 2288 (31 4863)<\/p>\n<\/td>\n

\n

Aerospace. Bearing bushings with flange made of
\nstainless steel with self-lubricating lining. Dimensions and load capacities; Issue:
\nDecember 1995<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

17. \u010cSN EN 50549-1<\/b> (33\u00a00127)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507394<\/p>\n<\/td>\n

\n

Requirements for
\nGenerating sets connected in parallel with distribution networks - Part 1: Connection to
\nLV distribution network - Production plants up to and including type B<\/b>; EN 50549-1:2019; EN
\n50549-1:2019\/AC:2019; Valid from 2019-09-01<\/p>\n

With effect from 2022-02-01 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CSN EN 50438 ed. 2 (33 0127)<\/p>\n<\/td>\n

\n

Requirements for parallel connection of microgenerators with
\npublic low-voltage distribution networks; Issue: September 2014<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

18. \u010cSN EN 50549-2<\/b> (33\u00a00127)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507393<\/p>\n<\/td>\n

\n

Requirements for
\nGenerating sets connected in parallel with distribution networks - Part 2: Connection to
\nMedium Voltage Distribution Network - Generating stations up to and including type B<\/b>+)<\/sup>;
\nEN 50549-2:2019; EN 50549-2:2019\/AC:2019; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

19. \u010cSN EN 50341-2-24<\/b> (33\u00a03300)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507392<\/p>\n<\/td>\n

\n

Electric outdoor
\nlines with voltage above AC 1 kV - National normative aspects (NNA) for Romania
\n(based on EN 50341-1:2012)<\/b>; EN 50341-2-24:2019; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

20. EN IEC 60947-4-1 ed. 4<\/b>
\n(35\u00a04101)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507606<\/p>\n<\/td>\n

\n

Switching and control
\nLow-voltage apparatus - Part 4-1: Contactors and motor starters - Part 4-1: Motor starters
\nElectromechanical contactors and motor starters<\/b>; EN IEC 60947-4-1:2019; IEC
\n60947-4-1:2018; Valid from 2019-09-01<\/p>\n

With effect from 2022-03-22 is repealed<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 60947-4-1 ed. 3 (35 4101)<\/p>\n<\/td>\n

\n

Low-voltage switchgear and controlgear - Part 4-1:
\nContactors and motor starters - Electromechanical contactors and motor starters;
\nRelease date: December 2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

21. CHSN P CEN ISO\/TS 21805<\/b>
\n(38\u00a09251)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507396<\/p>\n<\/td>\n

\n

Instructions for
\ndesign, selection and installation of vents to maintain integrity
\nconstruction of enclosed spaces protected by gas extinguishing equipment<\/b>; CEN
\nISO\/TS 21805:2019; ISO\/TS 21805:2018; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

22. EN ISO 683-3<\/b> (42\u00a00931)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507398<\/p>\n<\/td>\n

\n

Steel for thermal
\nProcessing, alloy and automatic steels - Part 3: Steels for carburizing
\nwith subsequent clouding<\/b>; EN ISO 683-3:2019; ISO 683-3:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 683-3 (42 0931)<\/p>\n<\/td>\n

\n

Heat treatment steels, alloy steels and steels
\nAutomatic machines - Part 3: Steel for carburizing with subsequent quenching; Announced:
\nJanuary 2019<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

23. EN 707<\/b> (47\u00a00625)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507399<\/p>\n<\/td>\n

\n

Agricultural machinery -
\nKaiders - Safety<\/b>+)<\/sup>; EN 707:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 707+A1 (47 0625)<\/p>\n<\/td>\n

\n

Agricultural machinery - Graders - Safety; Issue: January
\n2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

24. \u010cSN EN 17228<\/b> (64\u00a00515)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507638<\/p>\n<\/td>\n

\n

Plastics - Polymers,
\nPlastics and plastic products made of biological material - Terminology,
\ncharacteristics and reporting<\/b>; EN 17228:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CCN P CEN\/TS 16137 (64 0260)<\/p>\n<\/td>\n

\n

Plastics - Determination of natural carbon content; Announced:
\nOctober 2011<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CCN P CEN\/TS 16295 (64 0261)<\/p>\n<\/td>\n

\n

Plastics - Declaration of natural carbon content; Declared:
\nFebruary 2013<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CCN P CEN\/TS 16398 (64 0515)<\/p>\n<\/td>\n

\n

Plastics - Content reporting and notification template
\nBiocarbon and reuse of biopolymers and bioplastics - Datasheet;
\nAnnounced: November 2013<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

25. EN ISO 21301-1<\/b> (64\u00a03040)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507635<\/p>\n<\/td>\n

\n

Plastics -
\nEthylene vinyl acetate (EVAC) for forming - Part 1: Labelling system and fundamentals
\nfor specifications<\/b>; EN ISO 21301-1:2019; ISO 21301-1:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 4613-1 (64 3040)<\/p>\n<\/td>\n

\n

Plastics - Ethylene vinyl acetate (E\/VAC) for moulding - Part 1:
\nMarking and specifications; Issue: February 2000<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

26. EN ISO 21301-2<\/b> (64\u00a03040)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507634<\/p>\n<\/td>\n

\n

Plastics - Ethylene vinyl acetate
\n(EVAC) for forming - Part 2: Preparation of test pieces and determination of properties<\/b>;
\nEN ISO 21301-2:2019; ISO 21301-2:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 4613-2 (64 0217)<\/p>\n<\/td>\n

\n

Plastics - Ethylene vinyl acetate (E\/VAC) materials for
\nforming and extrusion - Part 2: Test-body preparation and determination
\nproperties; Issue: August 1997<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

27. EN ISO 21309-1<\/b> (64\u00a03901)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507641<\/p>\n<\/td>\n

\n

Plastics - Copolymers
\nEthylene vinyl alcohol (EVOH) for forming - Part 1: Labelling system and fundamentals
\nfor specifications<\/b>; EN ISO 21309-1:2019; ISO 21309-1:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 14663-1 (64 3901)<\/p>\n<\/td>\n

\n

Plastics - Copolymers of ethylene vinyl alcohol (EVOH) for
\nforming - Part 1: Marking system and basis for specifications; Announced:
\nNovember 2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

28. EN ISO 21309-2<\/b> (64\u00a03901)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507642<\/p>\n<\/td>\n

\n

Plastics - Copolymers
\nEthylene vinyl alcohol (EVOH) for forming - Part 2: Test-body preparation and
\ndetermination of properties<\/b>; EN ISO 21309-2:2019; ISO 21309-2:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 14663-2 (64 3901)<\/p>\n<\/td>\n

\n

Plastics - Copolymers of ethylene vinyl alcohol (EVOH) for
\nforming - Part 2: Preparation of test pieces and determination of properties;
\nAnnounced: November 2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

29. EN ISO 21305-1<\/b> (64\u00a04420)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507636<\/p>\n<\/td>\n

\n

Plastics - Materials
\nPolycarbonate (PC) for moulding - Part 1: Labelling system and basis for
\nSpecifications<\/b>; EN ISO 21305-1:2019; ISO 21305-1:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 7391-1 (64 4420)<\/p>\n<\/td>\n

\n

Polycarbonate (PC) materials for moulding and extrusion -
\nPart 1: Marking system and basis for specifications; Announced: September 2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

30. EN ISO 21305-2<\/b> (64\u00a04420)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507637<\/p>\n<\/td>\n

\n

Plastics - Materials
\nPolycarbonate (PC) for moulding - Part 2: Preparation of test pieces and
\ndetermination of properties<\/b>; EN ISO 21305-2:2019; ISO 21305-2:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 7391-2 (64 4420)<\/p>\n<\/td>\n

\n

Polycarbonate (PC) materials for moulding and extrusion -
\nPart 2: Preparation of test pieces and determination of properties; Announced: September
\n2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

31. EN ISO 20558-1<\/b> (64\u00a05706)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507639<\/p>\n<\/td>\n

\n

Plastics -
\nPolyphenylene sulphides (PPS) for forming - Part 1: Labelling system and fundamentals
\nfor specifications<\/b>; EN ISO 20558-1:2019; ISO 20558-1:2018; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

32. EN ISO 20558-2<\/b> (64\u00a05706)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507640<\/p>\n<\/td>\n

\n

Plastics -
\nPolyphenylene sulphides (PPS) for forming - Part 2: Preparation of test bodies and
\ndetermination of properties<\/b>; EN ISO 20558-2:2019; ISO 20558-2:2018; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

33. P CEN ISO\/TS 15875-7<\/b>
\n(64\u00a06413)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507631<\/p>\n<\/td>\n

\n

Plastic piping
\nHot and cold water distribution systems - Cross-linked polyethylene (PE-X) - Part
\n7: Guidance for conformity assessment<\/b>; CEN ISO\/TS 15875-7:2018; ISO\/TS
\n15875-7:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>HSN P CEN ISO\/TS 15875-7 (64 6413)<\/p>\n<\/td>\n

\n

Plastic piping systems for hot and cold water distribution
\n- Cross-linked polyethylene (PE-X) - Part 7: Guidelines for the assessment of conformity;
\nRelease date: November 2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

34. CCN P CEN ISO\/TS 15877-7<\/b>
\n(64\u00a06414)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507630<\/p>\n<\/td>\n

\n

Plastic piping
\nHot and cold water distribution systems - Chlorinated polyvinyl chloride (PVC-C)
\n- Part 7: Guidance on conformity assessment<\/b>; CEN ISO\/TS 15877-7:2018; ISO\/TS
\n15877-7:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>HSN P CEN ISO\/TS 15877-7 (64 6414)<\/p>\n<\/td>\n

\n

Plastic piping systems for hot and cold water distribution
\n- Chlorinated polyvinyl chloride (PVC-C) - Part 7: Assessment guidelines
\nCompliance; Issue: April 2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

35. CCN P CEN ISO\/TS 15876-7<\/b>
\n(64\u00a06416)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507632<\/p>\n<\/td>\n

\n

Plastic piping
\nHot and cold water distribution systems - Polybutene (PB) - Part 7: Instructions for use
\nconformity assessment<\/b>; CEN ISO\/TS 15876-7:2018; ISO\/TS 15876-7:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>CCN P CEN ISO\/TS 15876-7 (64 6416)<\/p>\n<\/td>\n

\n

Plastic piping systems for hot and cold water distribution
\n-\u00a0 <\/span>Polybutene (PB) - Part 7: Guidelines
\nfor conformity assessment; Issue: November 2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

36. HSN P CEN ISO\/TS 22391-7<\/b>
\n(64\u00a06425)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507633<\/p>\n<\/td>\n

\n

Plastic piping
\nHot and cold water distribution systems - Polyethylene resistant to elevated
\nto temperatures (PE-RT) - Part 7: Guidance on conformity assessment<\/b>; CEN ISO\/TS
\n22391-7:2018; ISO\/TS 22391-7:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>HSN P CEN ISO\/TS 22391-7 (64 6425)<\/p>\n<\/td>\n

\n

Plastic piping systems for hot and cold water distribution
\n- High temperature resistant polyethylene (PE-RT) - Part 7: Guidelines for
\nConformity assessment; Announced: June 2012<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

37. EN 12310-2<\/b> (72\u00a07636)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507650<\/p>\n<\/td>\n

\n

Waterproofing strips
\nand foils - Determination of resistance to tearing - Part 2: Plastic and rubber
\nstrips and foils for roof waterproofing<\/b>; EN 12310-2:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 12310-2 (72 7636)<\/p>\n<\/td>\n

\n

Waterproofing tapes and sheets - Determination of resistance to
\nbursting - Part 2: Plastic and rubber strips and sheets for waterproofing
\nRoofs; Issue: May 2001<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

38. EN 16002<\/b> (72\u00a07658)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507651<\/p>\n<\/td>\n

\n

Waterproofing strips
\nand foils - Determination of wind load resistance of mechanically anchored strips
\nand foils for roof waterproofing<\/b>; EN 16002:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 16002 (72 7658)<\/p>\n<\/td>\n

\n

Waterproofing tapes and sheets - Determination of resistance to
\nwind loads on mechanically anchored strips and membranes for roof waterproofing;
\nRelease date: October 2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

39. \u010cSN EN 17087<\/b> (72\u00a08014)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507424<\/p>\n<\/td>\n

\n

Building products -
\nAssessment of the release of hazardous substances - Preparation of laboratory test equipment
\nsample for release testing and content analysis<\/b>; EN 17087:2019; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

40. EN 15269-1<\/b> (73\u00a00868)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508171<\/p>\n<\/td>\n

\n

Extended application
\nthe results of fire and\/or smoke resistance tests on door assemblies, closures
\nand opening windows, including their hardware - Part 1: General
\nrequirements<\/b>+)<\/sup>; EN 15269-1:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 15269-1 (73 0868)<\/p>\n<\/td>\n

\n

Extended application of fire resistance test results
\nand\/or the smoke-tightness of door assemblies, closures and opening windows, including their
\nBuilding hardware components - Part 1: General requirements; Issue: July 2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

41. EN 13146-1<\/b> (73\u00a06375)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507427<\/p>\n<\/td>\n

\n

Railway applications
\n- Railway tracks - Methods of testing fastening systems - Part 1: Determination of resistance to
\nlongitudinal displacement of the rail<\/b>; EN 13146-1:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 13146-1+A1 (73 6375)<\/p>\n<\/td>\n

\n

Railway applications - Railways - Methods of testing systems
\nfixings - Part 1: Determination of resistance to longitudinal rail displacement;
\nRelease date: May 2015<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

42. EN 13146-7<\/b> (73\u00a06375)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507426<\/p>\n<\/td>\n

\n

Railway applications
\n- Railway applications - Methods of testing fastening systems - Part 7: Determination of clamping force and
\nrigidity against lifting<\/b>; EN 13146-7:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 13146-7 (73 6375)<\/p>\n<\/td>\n

\n

Railway applications - Railways - Methods of testing systems
\nFasteners - Part 7: Determination of clamping force; Issue: January 2013<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

43. EN 17075<\/b> (75\u00a07060)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507431<\/p>\n<\/td>\n

\n

Water quality -
\nGeneral requirements and performance test procedures for water monitoring equipment
\n- Measuring equipment<\/b>; EN 17075:2018; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

44. EN 12873-3<\/b> (75\u00a07333)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507434<\/p>\n<\/td>\n

\n

Influence of materials on
\nWater intended for human consumption - Effects of migration - Part 3: Test method for
\nIonex resins and sorbents<\/b>; EN 12873-3:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 12873-3 (75 7333)<\/p>\n<\/td>\n

\n

Impact of materials on water for human consumption - Impact
\nMigration - Part 3: Test method for ionex resins and sorbents; Edition:
\nSeptember 2006<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

45. HSN EN ISO 11704<\/b> (75\u00a07608)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507433<\/p>\n<\/td>\n

\n

Water quality -
\nMeasurement of total volume activity alpha and total volume activity beta -
\nLiquid scintillation measurement method<\/b>; EN ISO 11704:2018; ISO 11704:2018;
\nValid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 11704 (75 7608)<\/p>\n<\/td>\n

\n

Water quality - Measurement of total alpha activity and total
\nBeta activity in non-saline waters - Liquid scintillation measurement method;
\nAnnounced: February 2016<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

46. HSN EN ISO 10634<\/b> (75\u00a07776)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507432<\/p>\n<\/td>\n

\n

Water quality -
\nGuidelines for the preparation and treatment of organic substances which are not readily soluble in water
\nfor the following assessment of their biodegradability in aquatic
\nenvironment<\/b>+)<\/sup>; EN ISO 10634:2018; ISO 10634:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 10634 (75 7776)<\/p>\n<\/td>\n

\n

Water quality - Guidelines for preparation and treatment in water
\nof poorly soluble organic substances for the following evaluation of their
\nBiodegradability in the aquatic environment; Issue: March 1997<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

47. EN 17123<\/b> (75\u00a07788)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507429<\/p>\n<\/td>\n

\n

Water quality - Instructions
\nto determine the degree of modification of the hydromorphological characteristics of the transition
\nand coastal waters<\/b>; EN 17123:2018; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

48. EN 14701-4<\/b> (75\u00a08061)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507430<\/p>\n<\/td>\n

\n

Characterisation of sludge
\n- Filtration properties - Part 4: Determination of drainability of flocculated
\nsludge<\/b>; EN 14701-4:2018; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 14701-4 (75 8061)<\/p>\n<\/td>\n

\n

Characterisation of sludges - Filtration properties - Part 4: Determination
\nDewaterability of flocculated sludge; Issue: August 2010<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

49. EN 17177<\/b> (77\u00a01039)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507436<\/p>\n<\/td>\n

\n

Glass packaging -
\nBead cap - Bead cap with a diameter of 26 mm and a height of 6 mm<\/b>; EN
\n17177:2019; Valid from 2019-09-01<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

50. EN 343<\/b> (83\u00a02761)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507674<\/p>\n<\/td>\n

\n

Protective clothing -
\nProtection against rain<\/b>+)<\/sup>; EN 343:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN 343+A1 (83 2761)<\/p>\n<\/td>\n

\n

Protective clothing - Rain protection; Issue: March 2008<\/p>\n

\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

51. EN ISO 19115-2<\/b> (97\u00a09834)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 507465<\/p>\n<\/td>\n

\n

Geographic
\nInformation - Metadata - Part 2: Extensions for display and grid data<\/b>;
\nEN ISO 19115-2:2019; ISO 19115-2:2019; Valid from 2019-09-01<\/p>\n

Its promulgation repeals<\/p>\n<\/td>\n<\/tr>\n

\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>EN ISO 19115-2 (97 9834)<\/p>\n<\/td>\n

\n

Geographic information - Metadata - Part 2: Extensions for
\ndisplay data and grid data; Release: September 2010<\/p>\n

\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

CHANGES TO CSN<\/b><\/p>\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

52. EN 50504<\/b> (05\u00a02203)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508035<\/p>\n<\/td>\n

\n

Device validation
\nfor arc welding<\/b>; Announced: January 2009<\/p>\n

Change Z1<\/b>; Applicable
\nas of 2019-09-01<\/p>\n

EN IEC 60974-14 (05) applies in parallel with this standard.
\n2205) of August 2019, which will completely replace this standard from 2021-11-23.<\/p>\n<\/td>\n<\/tr>\n

\n

\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

53. \u010cSN EN 61051-1<\/b> (35\u00a08080)<\/p>\n

\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>cat.no. 508136<\/p>\n<\/td>\n

\n

Varistors for
\nuse in electronic equipment - Part 1: Generic specification<\/b>;
\nAnnounced: July 2009<\/p>\n

Change Z1<\/b>; Applicable
\nas of 2019-09-01<\/p>\n

In parallel with this standard, EN IEC 61051-1 ed.
\n2 (35 8080) of August 2019, which will completely replace this standard from 2021-12-03.<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Czech Agency for
\nstandardization<\/p>\n

Director of the Department
\nStandardization<\/p>\n

Zde\u0148ka Slan\u00e1<\/b> v. r.<\/p>\n

\u00a0 <\/span><\/p>\n

NOTICE No 73\/19<\/b><\/p>\n

Office for Technical Standardization, Metrology and State Testing<\/b><\/p>\n

information on
\nstart of drafting of Czech technical standards<\/p>\n

On the basis of \u00a7 6
\nAct No. 22\/1997 Coll. publishes the Office for Technical Standardization, Metrology and
\nstate testing of the list of tasks for the creation of Czech technical standards, newly
\nincluded in the plan.<\/p>\n

Anyone who has
\ninterest in becoming a participant in the comment procedure on the proposals of specific Czech
\nof the technical standards, let them apply within 4 weeks after publication to the compiler
\nthe address of which is given in the list below, or by
\nemail at normalizace@agenturacas.gov.cz.<\/p>\n

Draft CSNs may
\nprocessors to the participants (except for the relevant ministries or other
\ncentral administrative authorities and the relevant technical standardisation commissions)
\nprovide for overhead costs (reproduction, postage).<\/p>\n

At the same time
\npoints out that the tasks of creating Czech technical standards can only be handled by
\norganization or citizen with whom the Office for Technical Standardization, Metrology and
\nstate testing through the Czech Agency for Standardization, s. p. o,
\nagreed upon and for which the commencement of work was announced in the Bulletin of the Ministry of Industry and Trade, with an indication of
\nProcessor. Draft Czech technical standards for which both of these conditions would
\nhave not been met, they cannot be approved.<\/p>\n

For tasks
\nmarked with *) is presumed to be an adoption of a European or international standard by adopting
\noriginal according to 7.3.2 of MPN 1:2011.<\/p>\n

For tasks marked
\n**) the European standard is assumed to be adopted by approval for direct use as
\nCSN according to 7.3.3 MPN 1:2011.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Task number<\/b><\/p>\n<\/td>\n

\n

Title<\/b><\/p>\n<\/td>\n

\n

Dates<\/b>
\nStart<\/b>
\nexit<\/b><\/p>\n<\/td>\n

\n

Processor - address<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1<\/b><\/p>\n<\/td>\n

\n

2<\/b><\/p>\n<\/td>\n

\n

3<\/b><\/p>\n<\/td>\n

\n

4<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

01\/0063\/19<\/b><\/p>\n

TNK: 7<\/td>\n

\n

Product Geometric Specifications (GPS) - Layout
\ngeometric characteristics for production control
\nInternational documents referenced:EN ISO 20170:2019 + ISO 20170:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

01\/0064\/19<\/b><\/p>\n

TNK: 80<\/td>\n

\n

Non-destructive testing - Eddy current testing -
\nGeneral principles
\nInternational documents referenced:EN ISO 15549:2019 + ISO 15549:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory Organization
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

01\/0065\/19<\/b><\/p>\n

TNK: 106<\/td>\n

\n

Greenhouse gases - Part 2: Specification with guidance for
\nthe determination, monitoring and reporting of emission reductions or increases in sinks
\ngreenhouse gases for projects
\nInternational documents referenced:EN ISO 14064-2:2019 + ISO 14064-2:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

01\/0066\/19<\/b><\/p>\n

TNK: 1<\/td>\n

\n

Drawings of civil engineering structures - Displaying modular dimensions,
\nlines and networks
\nInternational documents referenced:EN ISO 8560:2019 + ISO 8560:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

01\/0067\/19<\/b><\/p>\n

TNK: 106<\/td>\n

\n

Greenhouse gases - Part 3: Specification with guidance for
\nvalidation and verification of greenhouse gas claims
\nInternational documents referenced:EN ISO 14064-3:2019 + ISO 14064-3:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Ivana Petra\u0161ov\u00e1, dpt.
\nPalack\u00e9ho str. 2541\/100
\nBrno 12 - Kr\u00e1lovo Pole
\n612 00<\/p>\n<\/td>\n<\/tr>\n

\n

03\/0015\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Anodic oxidation of aluminium and its alloys - Determination
\nelectrical breakdown voltage
\nInternational documents referenced:EN ISO 2376:2019 + ISO 2376:2019<\/p>\n<\/td>\n

\n

19-09
\n19-11<\/p>\n<\/td>\n

\n

Ing. Miloslav Smetana
\n\u0160umpersk\u00e1 356
\nPraha 18 - Let\u0148any
\n199 00<\/p>\n<\/td>\n<\/tr>\n

\n

05\/0034\/19<\/b><\/p>\n

TNK: 70<\/td>\n

\n

Welding materials - Wire electrodes, filled electrodes
\nand electrode-fusion combinations for arc welding of refractory steels under
\nflux - Classification
\nInternational documents referenced:EN ISO 24598:2019 + ISO 24598:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

05\/0035\/19<\/b><\/p>\n

TNK: 70<\/td>\n

\n

Welding consumables - Arc welding fluxes under
\nFlux cored and electric arc welding - Classification
\nInternational documents referenced:EN ISO 14174:2019 + ISO 14174:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

06\/0008\/19<\/b><\/p>\n

TNK: 26<\/td>\n

\n

Test gases - Test pressures - Appliance categories
\nInternational Document Adopted: EN 437:2018<\/p>\n<\/td>\n

\n

19-09
\n19-11<\/p>\n<\/td>\n

\n

Engineering Testing Institute, s.p.
\nHudcova 424\/56b
\nBrno
\n621 00<\/p>\n<\/td>\n<\/tr>\n

\n

07\/0005\/19<\/b><\/p>\n

TNK: 103<\/td>\n

\n

LPG equipment and accessories - Terminology
\nInternational document adopted: CEN\/TS 16769:2019 (TDG) **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

07\/0006\/19<\/b><\/p>\n

TNK: 103<\/td>\n

\n

LPG equipment and accessories - Safety valves for
\nLPG pressure vessels - Accessories
\nInternational documents referenced:EN 14071:2015+A1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

08\/0003\/19<\/b><\/p>\n

TNK: 48<\/td>\n

\n

Water turbines, storage pumps and pump turbines -
\nAcceptance tests on the model
\nFprEN IEC 60193:2018 + IEC 60193:2019 *)<\/p>\n<\/td>\n

\n

19-09
\n19-11<\/p>\n<\/td>\n

\n

Litostroj Engineering a.s.<\/p>\n

Capkova 2357\/5
\nBlansko
\n678 01<\/td>\n<\/tr>\n

\n

11\/0002\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Pumps - Methods of qualification and verification of the energy index
\nEfficiency of hydrodynamic pump units - Part 2: Testing and calculation
\nthe energy efficiency index (EEI) of each pump unit
\nInternational document adopted: EN 17038-2:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

11\/0003\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Pumps - Methods of qualification and verification of the energy index
\nEfficiency of hydrodynamic pump units - Part 1: General requirements and
\ntesting procedures and calculation of the Energy Efficiency Index (EEI)
\nInternational document adopted: EN 17038-1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

11\/0004\/19<\/b><\/p>\n

TNK: 62<\/td>\n

\n

Connections for hydraulic equipment and general use
\n- Bore inlets and end caps with metric threads according to ISO 261 sealed
\nO-rings - Part 1: Tapered entry holes for seals
\nO-ring
\nInternational documents referenced:EN ISO 6149-1:2019 + ISO 6149-1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

13\/0008\/19<\/b><\/p>\n

TNK: 50<\/td>\n

\n

Industrial valves - Requirements and testing of metallic
\nvalves as pressure equipment
\nInternational documents referenced:EN 16668:2016+A1:2018 (PEAD)<\/p>\n<\/td>\n

\n

19-08
\n19-11<\/p>\n<\/td>\n

\n

RNDr. Bohdan Kratochv\u00edl, Ph.D.
\nBanskobystrick\u00e1 663\/153
\nBrno - \u0158e\u010dkovice
\n621 00<\/p>\n<\/td>\n<\/tr>\n

\n

13\/0009\/19<\/b><\/p>\n

TNK: 50<\/td>\n

\n

Safety relief devices against excessive pressure -
\nPart 2: Safety devices with rupture disk
\nInternational documents referenced:EN ISO 4126-2:2019 + ISO 4126-2:2018<\/p>\n<\/td>\n

\n

19-08
\n19-11<\/p>\n<\/td>\n

\n

RNDr. Bohdan Kratochv\u00edl, Ph.D.
\nBanskobystrick\u00e1 663\/153
\nBrno - \u0158e\u010dkovice
\n621 00<\/p>\n<\/td>\n<\/tr>\n

\n

14\/0006\/19<\/b><\/p>\n

TNK: 112<\/td>\n

\n

Air conditioners, liquid cooling units,
\nheat pumps, process chillers and dehumidifiers with electrically driven
\nCompressors - Determination of sound power level - Part 2: Heat pumps
\nas water heaters
\nInternational document adopted: EN 12102-2:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

18\/0012\/19<\/b><\/p>\n

TNK: 56<\/td>\n

\n

Industrial communication networks - Installation of communication networks
\nin industrial plants
\nInternational document adopted: EN IEC 61918\/A11:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

22\/0001\/19<\/b><\/p>\n

TNK: 111<\/td>\n

\n

Safety requirements for superabrasive tools
\nInternational document adopted: EN 13236:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

25\/0010\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Communication systems for meters - Part 4: Wireless
\nM-Bus communication
\nInternational document adopted: EN 13757-4:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

25\/0011\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Heat meters - Part 6: Installation, commissioning,
\nactivity monitoring and maintenance
\nInternational documents referenced:EN 1434-6:2015+A1:2019<\/p>\n<\/td>\n

\n

20-01
\n20-01<\/p>\n<\/td>\n

\n

RNDr. Bohdan Kratochv\u00edl, Ph.D.
\nBanskobystrick\u00e1 663\/153
\nBrno - \u0158e\u010dkovice
\n621 00<\/p>\n<\/td>\n<\/tr>\n

\n

25\/0012\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Gas Meters - Rotary Volume Gas Meters
\nInternational Document Adopted: EN 12480:2018<\/p>\n<\/td>\n

\n

20-01
\n20-01<\/p>\n<\/td>\n

\n

RNDr. Bohdan Kratochv\u00edl, Ph.D.
\nBanskobystrick\u00e1 663\/153
\nBrno - \u0158e\u010dkovice
\n621 00<\/p>\n<\/td>\n<\/tr>\n

\n

25\/0013\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Heat meters - Part 5: Tests for initial verification
\nInternational documents referenced:EN 1434-5:2015+A1:2019<\/p>\n<\/td>\n

\n

20-01
\n20-01<\/p>\n<\/td>\n

\n

RNDr. Bohdan Kratochv\u00edl, Ph.D.
\nBanskobystrick\u00e1 663\/153
\nBrno - \u0158e\u010dkovice
\n621 00<\/p>\n<\/td>\n<\/tr>\n

\n

27\/0012\/19<\/b><\/p>\n

TNK: 143<\/td>\n

\n

Safety requirements for passenger cableways - Inspection
\npre-commissioning, maintenance, operational checks and tests
\nInternational Document Adopted: EN 1709:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

27\/0013\/19<\/b><\/p>\n

TNK: 143<\/td>\n

\n

Safety requirements for cableway installations - Ropes
\nInternational document adopted: EN 12927:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

27\/0014\/19<\/b><\/p>\n

TNK: 123<\/td>\n

\n

Cranes - Crane Working Time Monitoring
\nInternational document adopted: ISO 12482:2014 *)<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

27\/0015\/19<\/b><\/p>\n

TNK: 143<\/td>\n

\n

Safety requirements for passenger cableways - Inspection
\npre-commissioning, maintenance, operational checks and tests
\nInternational Document Adopted: EN 1709:2019<\/p>\n<\/td>\n

\n

19-08
\n19-11<\/p>\n<\/td>\n

\n

Union of the Elevator Industry of the Czech Republic
\nLamb 2
\nPrague 2
\n120 00<\/p>\n<\/td>\n<\/tr>\n

\n

28\/0030\/19<\/b><\/p>\n

TNK: 141<\/td>\n

\n

Railway applications - Braking - Switchgear and brake switches
\nInternational document adopted: EN 15355:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

28\/0031\/19<\/b><\/p>\n

TNK: 141<\/td>\n

\n

Railway applications - Driver's cab - Part 4:
\nDesign and approach
\nInternational document adopted: EN 16186-4:2019 (RAIL) **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

30\/0011\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Road vehicles - Vehicle to vehicle communication interface
\nover the power grid - Part 1: General information and use case definitions
\nInternational documents referenced:EN ISO 15118-1:2019 + ISO 15118-1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0066\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Spherical plain bearings from
\nstainless steel with wider inner ring, metal to metal - Dimensions and
\nload capacity - Inch series
\nInternational document adopted: EN 6097:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0067\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Spherical plain bearings from
\nstainless steel with self-lubricating lining and wider inner ring -
\nDimensions and load capacities - Inch series
\nInternational document adopted: EN 6096:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0068\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Adjustable bearing eyes according to
\nEN 4265 Stainless steel, threaded shank - Dimensions and load capacities -
\nInch series
\nInternational document adopted: EN 6055:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0069\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Adjustable bearing eyes according to
\nEN 4614 stainless steel with self-lubricating lining, threaded shank -
\nDimensions and load capacities - Inch series
\nInternational document adopted: EN 6056:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0070\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Adjustable bearing eyes according to
\nEN 6097 stainless steel, with wider inner ring, threaded
\nshank - Dimensions and load capacities - Inch series
\nInternational document adopted: EN 6098:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory Organization
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0071\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Adjustable bearing eyes according to
\nEN 6096 stainless steel, with self-lubricating lining and wider inner
\nring, with threaded shank - Dimensions and load capacities - Inch series
\nInternational document adopted: EN 6133:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0072\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Bolts with MJ thread, alloy
\nTitanium TI-P64001 - Grade: 1 100 MPa (at ambient temperature) - Technical
\nSpecifications
\nInternational document adopted: EN 3818:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0073\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Cable gland accessories
\nfor circular and rectangular electrical and optical connectors - Part 005: Cable
\nType A outlet, 90\u00b0, unsealed, with cable tension retaining clamp - Standard
\nproduct
\nInternational documents referenced:EN 3660-005:2018+AC:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0074\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Connecting pipe fittings
\n8\u00b030' to 28,000 kPa - Dynamic Sealing - Metric Series - Technical
\nSpecifications
\nInternational document adopted: EN 3275:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0075\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Screws with MJ thread, from
\nheat resistant nickel alloy HI-PH2601 (Inconel 718) - Grade: 1 275 MPa (at
\nambient temperature) \/ 650 \u00b0C - Technical specification
\nInternational document adopted: EN 2583:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

31\/0076\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Aerospace - Washers, bevelled, cylindrical
\nrecessed, made of alloy steel, cadmium plated
\nInternational document adopted: EN 2414:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

33\/0031\/19<\/b><\/p>\n

TNK: 97<\/td>\n

\n

Wind turbines - Part 3-1: Design requirements for
\nstationary offshore wind power plants
\nFprEN IEC 61400-3-1:2018 + IEC
\n61400-3-1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

33\/0032\/19<\/b><\/p>\n

TNK: 97<\/td>\n

\n

Application integration in energy companies -
\nSystem interfaces for power management - Part 4: Interfaces
\nfor the management of records (reports) and assets
\nInternational documents referenced:EN IEC 61968-4:2019 + IEC 61968-4:2019 *)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

33\/0034\/19<\/b><\/p>\n

TNK: 124<\/td>\n

\n

Surveillance and alarm receiving centres
\nInternational document referenced:FprEN 50518:2018<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Association of Technical Security Services Gr\u00e9mium Alarm
\nz.s.
\nNa Florenci 2116\/15
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

33\/0035\/19<\/b><\/p>\n

TNK: 97<\/td>\n

\n

Overhead power lines with a voltage above 1 kV AC - Part
\n2-2: National normative aspects (NNA) for Belgium (based on EN
\n50341-1:2012)
\nInternational document adopted: EN 50341-2-2:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory Organization
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

33\/0036\/19<\/b><\/p>\n

TNK: 21<\/td>\n

\n

International Electrotechnical Dictionary - Chapter 442:
\nElectrical accessories
\nInternational document adopted: IEC 60050-442\/A3:2019 *)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Medit Consult s.r.o.
\nDr. Milady Hor\u00e1kov\u00e9 5\/1086
\nOlomouc
\n772 00<\/p>\n<\/td>\n<\/tr>\n

\n

33\/0037\/19<\/b><\/p>\n

TNK: 97<\/td>\n

\n

Overhead power lines with a voltage above 1 kV AC - Part
\n2-4: National Normative Aspects (NNA) for Germany (based on EN
\n50341-1:2012)
\nInternational document adopted: EN 50341-2-4:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

33\/0038\/19<\/b><\/p>\n

TNK: 97<\/td>\n

\n

Overhead power lines over 1 kV AC - Part 2-15:
\nNational Normative Aspects (NNA) for the Netherlands (based on EN 50341-1:2012)
\nInternational document adopted: EN 50341-2-15:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

33\/0039\/19<\/b><\/p>\n

TNK: 22<\/td>\n

\n

Effects of current on humans and domestic animals - Part 2:
\nSpecial considerations
\nInternational document adopted: IEC 60479-2:2019<\/p>\n<\/td>\n

\n

19-10
\n20-01<\/p>\n<\/td>\n

\n

Medit Consult s.r.o.
\nDr. Milady Hor\u00e1kov\u00e9 5\/1086
\nOlomouc
\n772 00<\/p>\n<\/td>\n<\/tr>\n

\n

34\/0028\/19<\/b><\/p>\n

TNK: 97<\/td>\n

\n

Insulators for overhead lines - Composite support
\ninsulators for lines with a rated AC voltage exceeding 1 000 V -
\nPart 1: Definitions, end fittings and marking
\nInternational documents referenced:EN IEC 61952-1:2019 + IEC 61952-1:2019 *)<\/p>\n<\/td>\n

\n

19-06
\n19-10<\/p>\n<\/td>\n

\n

Association of High Voltage Testing Laboratories, z.s. - AZVN, z.s.
\nBusiness 267
\nPrague 9 - B\u011bchovice
\n190 11<\/p>\n<\/td>\n<\/tr>\n

\n

34\/0029\/19<\/b><\/p>\n

TNK: 110<\/td>\n

\n

Specification for the reuse of sulphur hexafluoride (SF6<\/sub>)
\nand mixtures thereof in electrical equipment
\nInternational documents referenced:EN IEC 60480:2019 + IEC 60480:2019<\/p>\n<\/td>\n

\n

19-07
\n19-10<\/p>\n<\/td>\n

\n

Association of High Voltage Testing Laboratories, z.s. - AZVN, z.s.
\nBusiness 267
\nPrague 9 - B\u011bchovice
\n190 11<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0054\/19<\/b><\/p>\n

TNK: 98<\/td>\n

\n

Calibration of optical power meters for fibre optics
\nInternational documents referenced:EN IEC 61315:2019 + IEC 61315:2019 *)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0055\/19<\/b><\/p>\n

TNK: 98<\/td>\n

\n

Fiber optic connectors and passive components -
\nOptical connector interfaces - Part 7-3: MPO type optical connectors -
\nTwo rows of 16-fibre width fibres
\nInternational documents referenced:EN IEC 61754-7-3:2019 + IEC 61754-7-3:2019
\n*)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0056\/19<\/b><\/p>\n

TNK: 98<\/td>\n

\n

Optical fibre cables - Part 2-31: Indoor cables -
\nSubject specification for fibre optic ribbon cables for indoor
\nbuilding cabling
\nInternational documents referenced:EN IEC 60794-2-31:2019 + IEC 60794-2-31:2019
\n*)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0057\/19<\/b><\/p>\n

TNK: 98<\/td>\n

\n

Optical fibre cables - Part 2-11: Indoor cables -
\nSubject specification for simplex and duplex cables for indoor cabling
\nbuildings
\nInternational documents referenced:EN IEC 60794-2-11:2019 + IEC 60794-2-11:2019
\n*)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0058\/19<\/b><\/p>\n

TNK: 102<\/td>\n

\n

Semiconductor components - Mechanical and climatic tests -
\nPart 18: Ionising radiation (total dose)
\nInternational documents referenced:EN IEC 60749-18:2019 + IEC 60749-18:2019 *)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

BUT Brno - Faculty of Electrical Engineering and Communication
\ntechnology
\nTechnical 3058\/10
\nBrno
\n616 00<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0059\/19<\/b><\/p>\n

TNK: 97<\/td>\n

\n

High-voltage switchgear and controlgear - Part 109:
\nParallel AC switches of series capacitors
\nInternational documents referenced:EN IEC 62271-109:2019 + IEC 62271-109:2019
\n*)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Ing. Ivan H\u00e1la
\nKrondlova 508\/16
\nBrno - \u017dabov\u0159esky
\n616 00<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0060\/19<\/b><\/p>\n

TNK: 98<\/td>\n

\n

Optical fibre cables - Part 2-21: Indoor cables -
\nSubject specification for optical multi-fibre distribution cables for
\ninternal cabling of buildings
\nInternational documents referenced:EN IEC 60794-2-21:2019 + IEC 60794-2-21:2019
\n*)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0061\/19<\/b><\/p>\n

TNK: 98<\/td>\n

\n

Fibre management systems and protective encapsulation
\nused in optical fibre communication systems - Specifications
\nProduct - Part 4-1: Passive optical enclosure for category A
\nInternational document adopted:FprEN 50411-4-1:2019 *)<\/p>\n<\/td>\n

\n

19-09
\n19-11<\/p>\n<\/td>\n

\n

SQS Vl\u00e1knov\u00e1 optika a.s.
\nComenius 304
\nNov\u00e1 Paka
\n509 01<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0062\/19<\/b><\/p>\n

TNK: 98<\/td>\n

\n

Fibre management systems and protective encapsulation
\nused in optical fibre communication systems - Specifications
\nProduct - Part 3-4: Wall-mounted junction boxes for connecting jumper cables,
\nfor category C and A
\nInternational document adopted:FprEN 50411-3-4:2019 *)<\/p>\n<\/td>\n

\n

19-09
\n19-11<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

35\/0063\/19<\/b><\/p>\n

TNK: 126<\/td>\n

\n

Very high voltage direct current power transmission
\n(HVDC) - Dictionary
\nInternational documents referenced: prEN 60633:2018 + IEC 60633:2019 *)<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0048\/19<\/b><\/p>\n

TNK: 33<\/td>\n

\n

Household and similar electrical appliances -
\nTest code for the determination of airborne noise - Part 2-14: Particular
\nrequirements for refrigerators, frozen food preservers and freezers
\nInternational documents referenced:EN 60704-2-14\/A1:2019 + IEC
\n60704-2-14\/A1:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Ing. Petr Voda
\nRataje 212
\nHlinsko in Bohemia
\n539 01<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0049\/19<\/b><\/p>\n

TNK: 127<\/td>\n

\n

Safety of laser equipment - Part 12: Safety
\nspatial optical communication systems used for information transmission
\nInternational documents referenced:EN IEC 60825-12:2019 (LVD2, RTTED) + IEC
\n60825-12:2019<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Ing. Ji\u0159\u00ed Hrazdil
\nVranovsk\u00e1 362\/20
\nBrno 14
\n614 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0050\/19<\/b><\/p>\n

TNK: 81<\/td>\n

\n

Medical electrical apparatus - Part 2-54: Particular
\nrequirements for the basic safety and essential functionality of X-ray equipment
\nfor sciagraphy and skiascopy
\nInternational documents referenced:EN 60601-2-54\/A2:2019 + IEC
\n60601-2-54\/A2:2018<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Ing. David Korpas, Ph.D.
\nEmbankment 772\/8
\nOlomouc
\n772 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0051\/19<\/b><\/p>\n

TNK: 67<\/td>\n

\n

Light sources for road vehicles - Dimensional,
\nelectrical and lighting requirements
\nInternational documents referenced EN 60809\/A3:2019 + IEC 60809\/A3:2019 *)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0052\/19<\/b><\/p>\n

TNK: 20<\/td>\n

\n

Information Technology - Security Techniques - Framework
\nPrivacy
\nInternational document adopted: ISO\/IEC 29100\/Amd.1:2018<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Ing. Alena H\u00f6nigov\u00e1
\nS. K. Neumann 7a\/2012
\nPrague 8
\n182 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0053\/19<\/b><\/p>\n

TNK: 67<\/td>\n

\n

Control gear for light sources - Part 2-7: Particular
\nrequirements for battery-powered electronic control devices for emergency
\nlighting (with own batteries)
\nInternational documents referenced EN 61347-2-7:2012\/FprA1:2017 (LVD3, RED) +
\nIEC 61347-2-7\/A1:2017<\/p>\n<\/td>\n

\n

19-07
\n19-10<\/p>\n<\/td>\n

\n

Ing. Jitka Machat\u00e1, CSc.
\nForeplay 4\/289
\nPrague 6 - Veleslav\u00edn
\n162 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0054\/19<\/b><\/p>\n

TNK: 33<\/td>\n

\n

Tumble dryers for household use - Methods of measuring function
\nInternational documents referenced:EN 61121:2013\/FprAA:2018 (ECOTUD, EL2,
\nELTUMB)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Ing. Petr Voda
\nRataje 212
\nHlinsko in Bohemia
\n539 01<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0055\/19<\/b><\/p>\n

TNK: 67<\/td>\n

\n

Light sources and LED components for road vehicles -
\nRequirements for execution
\nInternational documents referenced:EN IEC 60810\/A1:2019 + IEC 60810\/A1:2019 *)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0056\/19<\/b><\/p>\n

TNK: 42<\/td>\n

\n

Multilingual biometric dictionary based on the English
\nVersion ISO\/IEC 2382-37:2012
\nInternational Document Adopted: EN 17054:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0057\/19<\/b><\/p>\n

TNK: 113<\/td>\n

\n

Safety of lithium primary and battery cells
\nand batteries during transport
\nInternational documents referenced:EN IEC 62281:2019 + IEC 62281:2019<\/p>\n<\/td>\n

\n

19-07
\n19-10<\/p>\n<\/td>\n

\n

JBS, s.r.o.
\nOv\u010d\u00ed h\u00e1jek 2155\/6
\nPrague 5 - Stod\u016flky
\n158 00<\/p>\n<\/td>\n<\/tr>\n

\n

36\/0058\/19<\/b><\/p>\n

TNK: 33<\/td>\n

\n

Household and similar electrical appliances -
\nSafety - Part 2-6: Particular requirements for non-portable cookers, cooking
\npanels, ovens and similar appliances
\nInternational documents referenced: EN 60335-2-6:2015\/prA1:2016 (LVD3, RED) + EN
\n60335-2-6:2015\/FprAA:2019 (LVD3) + IEC 60335-2-6\/A1:2018<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Ing. Petr Voda
\nRataje 212
\nHlinsko in Bohemia
\n539 01<\/p>\n<\/td>\n<\/tr>\n

\n

37\/0002\/19<\/b><\/p>\n

TNK: 121<\/td>\n

\n

Electrical equipment for the detection of combustible gases in dwellings
\nBuildings - Part 2: Electrical apparatus for permanent operation in fixed
\ninstallations in recreational vehicles and similar premises - Additional
\ntest methods and functional requirements
\nInternational Document Adopted: EN 50194-2:2019<\/p>\n<\/td>\n

\n

19-09
\n19-10<\/p>\n<\/td>\n

\n

Physical Technical Testing Institute, state enterprise
\nPikartsk\u00e1 1337\/7
\nOstrava -Radvanice
\n716 07<\/p>\n<\/td>\n<\/tr>\n

\n

38\/0014\/19<\/b><\/p>\n

TNK: 132<\/td>\n

\n

Stable extinguishing systems - Sprinkler extinguishing systems in
\nBuildings for housing - Design, installation and maintenance
\nInternational Document Adopted: EN 16925:2018<\/p>\n<\/td>\n

\n

20-01
\n20-03<\/p>\n<\/td>\n

\n

PAVUS, a.s.
\nProseck\u00e1 412\/74
\nPrague 9
\n190 00<\/p>\n<\/td>\n<\/tr>\n

\n

38\/0015\/19<\/b><\/p>\n

TNK: 132<\/td>\n

\n

Fire extinguishing masks
\nInternational document adopted: FprEN 1869 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

38\/0016\/19<\/b><\/p>\n

TNK: 132<\/td>\n

\n

Manually operated fire jets - Part 1: General
\nrequirements
\nInternational document adopted: FprEN 15182-1 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

38\/0017\/19<\/b><\/p>\n

TNK: 132<\/td>\n

\n

Manually operated fire jets - Part 2: Combination
\nflow lines PN 16
\nInternational document adopted: FprEN 15182-2 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

38\/0018\/19<\/b><\/p>\n

TNK: 132<\/td>\n

\n

Manually operated fire jets - Part 4: High pressure
\nflow lines PN 40
\nInternational document adopted: FprEN 15182-4 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

38\/0019\/19<\/b><\/p>\n

TNK: 132<\/td>\n

\n

Manually operated fire sprinklers - Part 3: Full current
\nand\/or shower nozzles with one fixed angle PN 16
\nInternational document adopted: FprEN 15182-3 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

38\/0020\/19<\/b><\/p>\n

TNK: 55<\/td>\n

\n

Gas pressure regulators for inlet pressure up to 10 MPa (100
\nbar) including
\nInternational document adopted: FprEN 334 (new) **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

42\/0025\/19<\/b><\/p>\n

TNK: 62<\/td>\n

\n

Cold-formed hollow welded profiles of structural
\nSteels - Part 2: Deflection limits, dimensions and geometrical characteristics of cross-sections
\nInternational document adopted: EN 10219-2:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

42\/0026\/19<\/b><\/p>\n

TNK: 62<\/td>\n

\n

Hot-formed hollow sections of structural steel - Part
\n2:\u00a0 <\/span>Limit deviations, dimensions and
\ngeometric characteristics of the cross-section
\nInternational document adopted: EN 10210-2:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

42\/0027\/19<\/b><\/p>\n

TNK: 62<\/td>\n

\n

Weldable structural steels for anchored petroleum equipment
\nOffshore - Technical delivery conditions - Part 4: Cold-formed
\nwelded hollow profiles
\nInternational document adopted: EN 10225-4:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

42\/0028\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Weldable structural steels for anchored petroleum equipment
\nOffshore - Technical delivery conditions - Part 3: Hot-formed hollow
\nProfiles
\nInternational document adopted: EN 10225-3:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory Organization
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

42\/0029\/19<\/b><\/p>\n

TNK: 62<\/td>\n

\n

Weldable structural steels for anchored petroleum equipment
\nOffshore - Technical delivery conditions - Part 2: Profiles
\nInternational document adopted: EN 10225-2:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

42\/0030\/19<\/b><\/p>\n

TNK: 62<\/td>\n

\n

Weldable structural steels for anchored petroleum equipment
\nOffshore - Technical delivery conditions - Part 1: Sheets
\nInternational document adopted: EN 10225-1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

42\/0031\/19<\/b><\/p>\n

TNK: 64<\/td>\n

\n

Metal powders - Determination of oxygen content by reduction
\nmethods - Part 4: Determination of total oxygen content by reductive extraction
\nInternational documents referenced:EN ISO 4491-4:2019 + ISO 4491-4:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

42\/0032\/19<\/b><\/p>\n

TNK: 62<\/td>\n

\n

Stainless steel castings
\nInternational Document Adopted: EN 10283:2019<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Ing. Jan Weischera - DWV
\nBushradsk\u00e1 98
\nKladno 3
\n272 03<\/p>\n<\/td>\n<\/tr>\n

\n

49\/0006\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Ladders - Part 3: Markings and instructions for use
\nInternational Document Adopted: EN 131-3:2018<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Ivana Petra\u0161ov\u00e1, dpt.
\nPalack\u00e9ho str. 2541\/100
\nBrno 12 - Kr\u00e1lovo Pole
\n612 00<\/p>\n<\/td>\n<\/tr>\n

\n

49\/0007\/19<\/b><\/p>\n

TNK: 111<\/td>\n

\n

Safety of woodworking machines - Exhaust systems
\nchips and dust for indoor installation - Safety requirements
\nInternational document adopted: EN 16770:2018<\/p>\n<\/td>\n

\n

20-01
\n20-01<\/p>\n<\/td>\n

\n

Association of Engineering Technology
\nPolitical Prisoners 1419\/11
\nPrague 1
\n113 42<\/p>\n<\/td>\n<\/tr>\n

\n

63\/0006\/19<\/b><\/p>\n

TNK: 23<\/td>\n

\n

Clamping (mechanical) couplings for hot steam hoses
\nfor pressures up to 18 bar
\nInternational documents referenced:EN 14423:2013+A2:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

64\/0049\/19<\/b><\/p>\n

TNK: 131<\/td>\n

\n

Plastic piping systems for non-pressure sewerage
\nConnections and sewerage networks buried in the ground - Unplasticized polyvinyl chloride (PVC-U) -
\nPart 1: Specifications for pipes, fittings and system
\nInternational document adopted: FprEN 1401-1<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Institute for Testing and Certification, a.s.
\ntr. Tomas Bata 299
\nZl\u00edn - Louky
\n763 02<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0013\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Fertilizers - Extraction of total trace nutrients in
\nfertiliser with royal meadow grass
\nInternational Document Adopted: EN 16964:2018<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Kate\u0159ina \u0160l\u00e9glov\u00e1
\nObl\u00e1 461\/83
\nBrno, Nov\u00fd L\u00edskovec
\n634 00<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0014\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Fertilizers - Extraction of water-soluble trace nutrients in
\nfertilisers and the removal of organic matter from fertiliser extracts
\nInternational Document Adopted: EN 16962:2018<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Kate\u0159ina \u0160l\u00e9glov\u00e1
\nObl\u00e1 461\/83
\nBrno, Nov\u00fd L\u00edskovec
\n634 00<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0027\/19<\/b><\/p>\n

TNK: 118<\/td>\n

\n

Petroleum products - Determination of aromatic hydrocarbon groups
\nin middle distillates - High performance liquid chromatography with
\nrefractometric detection
\nInternational document adopted: EN 12916:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0028\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Soil liming materials - Determining the need for liming -
\nMethod with ammonium acetate buffer solution at pH 5,5
\nInternational document adopted: CEN\/TS 17338:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0029\/19<\/b><\/p>\n

TNK: 134<\/td>\n

\n

Asphalts and asphalt binders - Recovery of binder from
\nAsphalt emulsions, diluted or fluxed asphalt binders - Part 2:
\nStabilization after recovery by evaporation
\nInternational Document Adopted: EN 13074-2:2019<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

PRAGOPROJEKT, a.s.
\nK Rysanka 1668\/16
\nPrague 4
\n147 54<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0030\/19<\/b><\/p>\n

TNK: 134<\/td>\n

\n

Asphalts and asphalt binders - Recovery of binder from
\nAsphalt emulsions, diluted or fluxed asphalt binders - Part 1:
\nRecovery by evaporation
\nInternational Document Adopted: EN 13074-1:2019<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

PRAGOPROJEKT, a.s.
\nK Rysanka 1668\/16
\nPrague 4
\n147 54<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0031\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Fertilizers and soil liming materials - Glossary - Part 3:
\nTerms relating to soil liming materials
\nInternational Document Adopted: EN 12944-3:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Kate\u0159ina \u0160l\u00e9glov\u00e1
\nObl\u00e1 461\/83
\nBrno, Nov\u00fd L\u00edskovec
\n634 00<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0032\/19<\/b><\/p>\n

TNK: 118<\/td>\n

\n

Petroleum and petroleum products from natural or synthetic sources
\n- Determination of paraffin deposition temperature
\nInternational document adopted:FprEN ISO 3015 + ISO 3015:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Engineering Society z.s.
\nNovotn\u00e9ho l\u00e1vka 200\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0033\/19<\/b><\/p>\n

TNK: 118<\/td>\n

\n

Petroleum products - Determination of cloud point - Automatic
\ngradual cooling method
\nInternational document referenced:FprEN ISO 22995 + ISO 22995:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Engineering Society z.s.
\nNovotn\u00e9ho l\u00e1vka 200\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

65\/0034\/19<\/b><\/p>\n

TNK: 118<\/td>\n

\n

Petroleum and petroleum products from natural or synthetic sources
\n- Determination of the pour point
\nInternational document adopted:FprEN ISO 3016 + ISO 3016:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Czech Engineering Society z.s.
\nNovotn\u00e9ho l\u00e1vka 200\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0012\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

Powder coatings - Part 1: Determination of distribution
\nparticle size by sieve analysis
\nInternational documents referenced:EN ISO 8130-1:2019 + ISO 8130-1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0013\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

Powder coatings - Part 7: Determination of weight loss
\nduring burning
\nInternational documents referenced:EN ISO 8130-7:2019 + ISO 8130-7:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0014\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

Powder coatings - Part 11: Creep test after
\ninclined plane
\nInternational documents referenced:EN ISO 8130-11:2019 + ISO 8130-11:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0015\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

Powder coatings - Part 12: Determination of compatibility
\nInternational documents referenced:EN ISO 8130-12:2019 + ISO 8130-12:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0016\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

Powder coatings - Part 13: Size analysis
\nparticles by laser diffraction
\nInternational documents referenced:EN ISO 8130-13:2019 + ISO 8130-13:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0017\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

General test methods for pigments and fillers - Part 17:
\nComparison of the lightening ability of white pigments
\nInternational documents referenced:EN ISO 787-17:2019 + ISO 787-17:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0018\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

Coatings and plastics - Determination of non-volatile content
\nsubstances
\nInternational document adopted:FprEN ISO 3251 + ISO 3251:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

SV\u00daOM, s.r.o.
\nAt the Town Brewery 934\/4
\nPrague 7 - Hole\u0161ovice
\n170 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0019\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

Powder coatings - Part 14: Terminology
\nInternational documents referenced:EN ISO 8130-14:2019 + ISO 8130-14:2019<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

SV\u00daOM, s.r.o.
\nAt the Town Brewery 934\/4
\nPrague 7 - Hole\u0161ovice
\n170 00<\/p>\n<\/td>\n<\/tr>\n

\n

67\/0020\/19<\/b><\/p>\n

TNK: 32<\/td>\n

\n

Coatings - Determination of resistance to liquids -
\nPart 3: Method using absorbent material
\nInternational documents referenced:EN ISO 2812-3:2019 + ISO 2812-3:2019<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

SV\u00daOM, s.r.o.
\nAt the Town Brewery 934\/4
\nPrague 7 - Hole\u0161ovice
\n170 00<\/p>\n<\/td>\n<\/tr>\n

\n

70\/0002\/19<\/b><\/p>\n

TNK: 140<\/td>\n

\n

Glass in the construction industry - Thermally toughened
\nsoda lime silicate safety glass - Part 1: Definition and description
\nInternational documents referenced:EN 12150-1:2015+A1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

72\/0029\/19<\/b><\/p>\n

TNK: 120<\/td>\n

\n

Thermal insulation products for buildings - Products made of loose
\nLoose-fill cellulose in situ (LFCI) - Part 1: Specifications for products
\nbefore installation
\nInternational documents referenced:EN 15101-1:2013+A1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

72\/0030\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Toilet bowls and sets - Connecting dimensions
\nInternational document adopted: EN 33:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

72\/0031\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Ceramic cladding elements - Part 4: Determination of strength in
\nbending and fracture load
\nInternational documents referenced:EN ISO 10545-4:2019 + ISO 10545-4:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

73\/0080\/19<\/b><\/p>\n

TNK: 36<\/td>\n

\n

Design of concrete bridge structures (amendment to CSN 73
\n6214:2014)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Technical University in Prague Faculty of Civil Engineering
\nTh\u00e1kurova 2077\/7
\nPrague 6
\n166 29<\/p>\n<\/td>\n<\/tr>\n

\n

73\/0081\/19<\/b><\/p>\n

TNK: 35<\/td>\n

\n

National Annex - Eurocode 3: Design of steel
\nstructures - Part 4-2: Tanks<\/p>\n<\/td>\n

\n

19-06
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

73\/0082\/19<\/b><\/p>\n

TNK: 141<\/td>\n

\n

Railway applications - Noise emission - Roughness measurement
\nrail surface in relation to rolling noise
\nInternational document adopted: EN 15610:2019 (RAIL) **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

73\/0083\/19<\/b><\/p>\n

TNK: 41<\/td>\n

\n

Implementation of special geotechnical works - Tryskov\u00e1
\ngrouting
\nInternational Document Adopted: EN 12716:2018<\/p>\n<\/td>\n

\n

19-11
\n20-02<\/p>\n<\/td>\n

\n

Ing. Jind\u0159ich \u0158i\u010dica
\n\u0160tichova 646\/36
\nPrague 11
\n149 00<\/p>\n<\/td>\n<\/tr>\n

\n

73\/0084\/19<\/b><\/p>\n

TNK: 76<\/td>\n

\n

Daylighting in buildings - Part 2: Daylighting in dwellings
\nbuildings (amendment to CSN 73 0580-2:2007)<\/p>\n<\/td>\n

\n

19-09
\n19-10<\/p>\n<\/td>\n

\n

Atelier of lighting technology s.r.o.
\nBra\u0161kovsk\u00e1 368\/1
\nPrague 6 - Liboc
\n161 00<\/p>\n<\/td>\n<\/tr>\n

\n

73\/0085\/19<\/b><\/p>\n

TNK: 8<\/td>\n

\n

Acoustics - Noise protection in buildings and assessment
\nAcoustic properties of construction products - Requirements (revision of \u010cSN 73
\n0532:2010)<\/p>\n<\/td>\n

\n

20-02
\n20-07<\/p>\n<\/td>\n

\n

Centrum stavebn\u00edho in\u017een\u00fdrstv\u00ed a.s.
\nPra\u017esk\u00e1 16
\nPrague 10 - Hostiva\u0159
\n102 21<\/p>\n<\/td>\n<\/tr>\n

\n

75\/0026\/19<\/b><\/p>\n

TNK: 104<\/td>\n

\n

Water quality - Guidance for sampling mesozooplankton from
\nmarine and brackish waters using a network
\nInternational document adopted: EN 17218:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

75\/0027\/19<\/b><\/p>\n

TNK: 145<\/td>\n

\n

Backfilled dams (revision of \u010cSN 75 2310:2006)<\/p>\n<\/td>\n

\n

19-07
\n19-12<\/p>\n<\/td>\n

\n

Sweco Hydroprojekt a.s.
\nT\u00e1borsk\u00e1 940\/31
\nPrague 4
\n140 16<\/p>\n<\/td>\n<\/tr>\n

\n

80\/0017\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Textiles - Quantitative chemical analysis - Part 18: Mixtures
\nsilk with other protein fibres (sulphuric acid method)
\nInternational documents referenced:EN ISO 1833-18:2019 + ISO 1833-18:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

80\/0018\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Textiles - Quantitative chemical analysis - Part 21: Mixtures
\nchlorofibres, certain modacrylic fibres, certain elastane fibres,
\nacetate, triacetate and certain other fibres (method using
\ncyclohexanone)
\nInternational documents referenced:EN ISO 1833-21:2019 + ISO 1833-21:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

80\/0019\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Textiles - Quantitative chemical analysis - Part 10: Mixtures
\ntriacetate or polylactide fibres and certain other fibres (method with
\nusing dichloromethane)
\nInternational documents referenced:EN ISO 1833-10:2019 + ISO 1833-10:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

80\/0020\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Textiles - Determination of metal content - Part 3: Determination of lead
\nreleased by the artificial saliva solution
\nInternational document adopted: EN 16711-3:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

80\/0021\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Textiles - Quantitative chemical analysis - Part 3: Mixtures
\nacetate and certain other fibres (acetone method)
\nInternational documents referenced:EN ISO 1833-3:2019 + ISO 1833-3:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

83\/0046\/19<\/b><\/p>\n

TNK: 117<\/td>\n

\n

Air quality - Sampling and analysis of pollen grains and
\nallergenic mould spores in the air - The volumetric method according to Hirst
\nInternational document adopted: EN 16868:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

84\/0003\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Fume cupboards - Part 3: Type test methods
\nInternational document adopted: EN 14175-3:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

85\/0031\/19<\/b><\/p>\n

TNK: 81<\/td>\n

\n

Dentistry - Dental mirrors
\nInternational documents referenced:EN ISO 9873:2019 + ISO 9873:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

87\/0041\/19<\/b><\/p>\n

TNK: 96<\/td>\n

\n

Intelligent Transport Systems (ITS) - Vehicular communications
\n- Geographic network design - Part 5: Transmission protocols - Subpart 1:
\nBasic transmission protocol
\nInternational document adopted: ETSI EN 302 636-5-1 V2.2.1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

91\/0011\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Loose laid tiles - Semi-rigid multilayer modular
\nfloor tiles (MMF) with a wear-resistant surface layer
\nInternational documents referenced:EN 16511:2014+A1:2019<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Textile Testing Institute, s.p.
\nV\u00e1clavsk\u00e1 6
\nBrno
\n658 41<\/p>\n<\/td>\n<\/tr>\n

\n

91\/0012\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Resilient and laminate floor coverings - Determining the impact
\nsimulated movement of the furniture leg
\nInternational document adopted: prEN ISO 16581 + ISO 16581:2014<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Textile Testing Institute, s.p.
\nV\u00e1clavsk\u00e1 6
\nBrno
\n658 41<\/p>\n<\/td>\n<\/tr>\n

\n

91\/0013\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Resilient floor coverings - Specifications for solid and
\npatterned linoleum with cork backing
\nInternational document adopted: prEN 687<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Textile Testing Institute, s.p.
\nV\u00e1clavsk\u00e1 6
\nBrno
\n658 41<\/p>\n<\/td>\n<\/tr>\n

\n

91\/0014\/19<\/b><\/p>\n

TNK: 31<\/td>\n

\n

Resilient floor coverings - Specifications for solid and
\npatterned linoleum with foam backing
\nInternational document adopted: prEN 686<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Textile Testing Institute, s.p.
\nV\u00e1clavsk\u00e1 6
\nBrno
\n658 41<\/p>\n<\/td>\n<\/tr>\n

\n

94\/0018\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Skateparks - Safety requirements and test methods
\nInternational Document Adopted: EN 14974:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Institute for Testing and Certification, a.s.
\ntr. Tomas Bata 299
\nZl\u00edn - Louky
\n763 02<\/p>\n<\/td>\n<\/tr>\n

\n

94\/0019\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Inflatable play equipment - Part 1: Safety requirements
\nand test methods
\nInternational document adopted: EN 14960-1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

94\/0020\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Stationary training equipment - Part 9: Elliptical
\ntraining equipment, other specific safety requirements and testing
\nmethods
\nInternational documents referenced:EN ISO 20957-9:2016\/A1:2019 + ISO
\n20957-9\/Amd.1:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

97\/0004\/19<\/b><\/p>\n

TNK: 42<\/td>\n

\n

Information technology - Fish and seafood products
\nproducts - Requirements for the marking of unit packs and pallets in
\ntrade in fish and seafood products
\nInternational document adopted: prEN 17099 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

97\/0005\/19<\/b><\/p>\n

TNK: 42<\/td>\n

\n

Date and time - Information exchange display - Part 1:
\nBasic rules
\nInternational Document Adopted: ISO 8601-1:2019<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

HEDO Praha s.r.o.
\nSu\u0161ilova 1506\/15
\nPrague 10 - Uh\u0159\u00edn\u011bves
\n104 00<\/p>\n<\/td>\n<\/tr>\n

\n

97\/0006\/19<\/b><\/p>\n

TNK: 42<\/td>\n

\n

Date and time - Information exchange display - Part 2:
\nExtensions
\nInternational Document Adopted: ISO 8601-2:2019<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

HEDO Praha s.r.o.
\nSu\u0161ilova 1506\/15
\nPrague 10 - Uh\u0159\u00edn\u011bves
\n104 00<\/p>\n<\/td>\n<\/tr>\n

\n

98\/0003\/19<\/b><\/p>\n

TNK: 20<\/td>\n

\n

Health Informatics - Syntax for displaying content
\nHealthcare classification systems - Markup language for classification
\n(ClaML)
\nInternational document adopted:FprEN ISO 13120 + ISO 13120:2019 **)<\/p>\n<\/td>\n

\n

19-08
\n19-09<\/p>\n<\/td>\n

\n

Czech Agency for Standardization, State Contributory
\norganizations
\nBiskupsk\u00fd dv\u016fr 1148\/5
\nPrague 1
\n110 00<\/p>\n<\/td>\n<\/tr>\n

\n

MP\/0001\/19<\/b><\/p>\n

TNK: 65<\/td>\n

\n

Concrete tiles and fittings for roofing and cladding
\nWalls - Product Specification
\nInternational documents referenced:EN 490:2011+A1:2017 (CPR)<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Research Institute of Civil Engineering - Certification Company,
\ns.r.o.
\nPra\u017esk\u00e1 810\/16
\nPrague 15 - Hostiva\u0159
\n102 00<\/p>\n<\/td>\n<\/tr>\n

\n

MP\/0002\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Fibre cement boards and fittings - Product specification and
\ntest methods
\nInternational documents referenced:EN 492:2012+A2:2018 (CPR)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Research Institute of Civil Engineering - Certification Company,
\ns.r.o.
\nPra\u017esk\u00e1 810\/16
\nPrague 15 - Hostiva\u0159
\n102 00<\/p>\n<\/td>\n<\/tr>\n

\n

MP\/0003\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Waterproofing strips and foils - Plastic and rubber foils for
\nMoisture insulation and plastic and rubber strips and foils for pressure insulation
\nWater - Definitions and characteristics
\nInternational documents referenced:EN 13967:2012+A1:2017 (CPR)<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Research Institute of Civil Engineering - Certification Company,
\ns.r.o.
\nPra\u017esk\u00e1 810\/16
\nPrague 15 - Hostiva\u0159
\n102 00<\/p>\n<\/td>\n<\/tr>\n

\n

MP\/0004\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Fibre cement flat boards - Product specification and
\ntest methods
\nInternational documents referenced:EN 12467:2012+A2:2018 (CPR)<\/p>\n<\/td>\n

\n

19-08
\n19-10<\/p>\n<\/td>\n

\n

Research Institute of Civil Engineering - Certification Company,
\ns.r.o.
\nPra\u017esk\u00e1 810\/16
\nPrague 15 - Hostiva\u0159
\n102 00<\/p>\n<\/td>\n<\/tr>\n

\n

MP\/0005\/19<\/b><\/p>\n

TNK: 132<\/td>\n

\n

Fixed firefighting systems - Foam systems - Part 2:
\nDesign, construction and maintenance
\nInternational documents referenced:EN 13565-2:2018+AC:2019<\/p>\n<\/td>\n

\n

19-10
\n20-02<\/p>\n<\/td>\n

\n

PAVUS, a.s.
\nProseck\u00e1 412\/74
\nPrague 9
\n190 00<\/p>\n<\/td>\n<\/tr>\n

\n

MP\/0006\/19<\/b><\/p>\n

TNK: 94<\/td>\n

\n

Medical Technical Valves - Low Pressure Thermostatic
\nMixers - General technical requirements
\nInternational Document Adopted: EN 1287:2017<\/p>\n<\/td>\n

\n

19-07
\n19-09<\/p>\n<\/td>\n

\n

Sweco Hydroprojekt a.s.
\nT\u00e1borsk\u00e1 940\/31
\nPrague 4
\n140 16<\/p>\n<\/td>\n<\/tr>\n

\n

MP\/0007\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Toilet bowls and sets with built-in odour
\nDeadline
\nInternational Document Adopted: EN 997:2018 (CPR)<\/p>\n<\/td>\n

\n

19-07
\n19-10<\/p>\n<\/td>\n

\n

Institute for Testing and Certification, a.s.
\ntr. Tomas Bata 299
\nZl\u00edn - Louky
\n763 02<\/p>\n<\/td>\n<\/tr>\n

\n

MP\/0008\/19<\/b><\/p>\n

TNK: -<\/td>\n

\n

Cistern flushers for toilet bowls and urinals
\nInternational Document Adopted: EN 14055:2018 (CPR)<\/p>\n<\/td>\n

\n

19-07
\n19-10<\/p>\n<\/td>\n

\n

Institute for Testing and Certification, a.s.
\ntr. Tomas Bata 299
\nZl\u00edn - Louky
\n763 02<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Czech Agency for
\nstandardization<\/p>\n

Director of the Department
\nStandardization<\/p>\n

Zde\u0148ka Slan\u00e1<\/b> v. r.<\/p>\n

\u00a0<\/b><\/p>\n

NOTICE NO.
\n74\/19<\/b><\/p>\n

Office for Technical Standardization, Metrology and State Testing<\/b><\/p>\n

on proposals
\nto abolish the CSN<\/p>\n

Office for
\nTechnical Standardization, Metrology and State Testing submits according to \u00a7 6
\nAct No. 22\/1997 Coll. for consideration of the list of Czech technical standards (\u010cSN)
\nproposed for cancellation due to their technical obsolescence, outdatedness or
\nfor other reasons.<\/p>\n

Anyone who has
\nreasoned objections to the cancellation of the CSN may be lodged within 6 weeks of publication
\nthis notification to the standards officer listed in the list of standards proposed for
\ncancellation, at the following address<\/p>\n

Czech Agency for
\nStandardization,<\/p>\n

state contributory
\norganization,<\/p>\n

Bishop's Court
\n1148\/5, 110 00\u00a0 <\/span>Prague 1<\/p>\n

E-mail:
\nnormalizace@agenturacas.gov.cz<\/p>\n

Tel: 221
\n802\u00a0111<\/p>\n

<\/a><\/p>\n\n\n\n\n\n\n\n\n\n
\n

CSN designation<\/b><\/span><\/p>\n

Month and year of publication<\/b><\/span><\/p>\n

(date of approval)<\/b><\/span><\/p>\n<\/td>\n

\n

\u00a0<\/b><\/span><\/p>\n

Sorting character<\/b><\/span><\/p>\n<\/td>\n

\n

\u00a0<\/b><\/span><\/p>\n

CSN name<\/b><\/span><\/p>\n<\/td>\n

\n

Department number<\/b><\/span><\/p>\n

\u00a0<\/b><\/span><\/p>\n

Name of the referee TIME<\/b><\/span><\/p>\n<\/td>\n<\/tr>\n

 <\/p>\n

\u00a0<\/span><\/span><\/p>\n<\/td>\n

 <\/p>\n

\u00a0<\/span><\/span><\/p>\n<\/td>\n

 <\/p>\n

\u00a0<\/span><\/span><\/p>\n<\/td>\n

 <\/p>\n

\u00a0<\/span><\/span><\/p>\n<\/td>\n<\/tr>\n

\n

CSN 44 1309<\/span><\/p>\n

July 2006<\/span><\/p>\n<\/td>\n

\n

44 1309<\/span><\/p>\n<\/td>\n

\n

Solid fuels - Withdrawal,
\nsample preparation and mechanical testing of briquettes<\/span><\/p>\n<\/td>\n

\n

2500<\/span><\/p>\n

Ing. Hejtm\u00e1nkov\u00e1<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

CSN 70 3000<\/span><\/p>\n

1991-02-08<\/span><\/p>\n<\/td>\n

\n

70 3000<\/span><\/p>\n<\/td>\n

\n

Principles for use
\nglass containers<\/span><\/p>\n<\/td>\n

\n

2500<\/span><\/p>\n

Ing. Foretov\u00e1<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

CSN 70 3002<\/span><\/p>\n

November 1993<\/span><\/p>\n<\/td>\n

\n

70 3002<\/span><\/p>\n<\/td>\n

\n

Threaded glass mouths
\nscrew cap packaging. Dimensions<\/span><\/p>\n<\/td>\n

\n

2500<\/span><\/p>\n

Ing. Foretov\u00e1<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

CSN 70 3401<\/span><\/p>\n

1986-12-08<\/span><\/p>\n<\/td>\n

\n

70 3401<\/span><\/p>\n<\/td>\n

\n

Glass for cosmetic
\nindustry. Packaging glass for cosmetics<\/span><\/p>\n<\/td>\n

\n

2500<\/span><\/p>\n

Ing. Foretov\u00e1<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

CSN 70 3500<\/span><\/p>\n

1987-02-02<\/span><\/p>\n<\/td>\n

\n

70 3500<\/span><\/p>\n<\/td>\n

\n

Large packing glass.
\nCommon provisions<\/span><\/p>\n<\/td>\n

\n

2500<\/span><\/p>\n

Ing. Foretov\u00e1<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/span><\/p>\n

 <\/p>\n

Czech Agency for
\nstandardization<\/p>\n

Director of the Standardisation Department<\/p>\n

Zde\u0148ka Slan\u00e1<\/b> v. r.<\/p>\n

NOTICE No 75\/19<\/b><\/p>\n

of the Office for
\ntechnical standardisation, metrology and state testing<\/b><\/p>\n

on the public hearing on the proposals
\nEuropean standards CEN<\/p>\n

Office of Technical
\nStandardisation, Metrology and State Testing
\n<\/span>submits pursuant to Section 6 of Act No. 22\/1997
\nColl. for public consultation the following draft standards of the European Committee for
\nstandardisation (CEN).<\/span><\/p>\n

On these proposals
\nconsidered as draft CSNs can be submitted by anyone, no later than 2 weeks before the relevant
\nby the deadline indicated below for each item, to submit comments to<\/p>\n

Czech Agency for
\nStandardization,<\/p>\n

state contributory
\norganization,<\/p>\n

Bishop's Court
\n1148\/5, 110 00\u00a0 <\/span>Prague 1<\/p>\n

E-mail: normalizace@agenturacas.gov.cz<\/p>\n

Tel: 221 802 111<\/p>\n

These proposals are
\navailable from the Customer Centre of the Czech Standards Agency,<\/p>\n

state contributory
\norganization,<\/p>\n

Bishop's Court
\n1148\/5, 110 00\u00a0 <\/span>Prague 1.<\/p>\n

\u00a0<\/span><\/p>\n

\u00a0<\/span><\/p>\n

\u00a0<\/span><\/p>\n

Most of these proposals can be read and
\ncomment at http:\/\/drafts.unmz.cz\/<\/span><\/p>\n

EUROPEAN PROPOSALS
\nSTANDARDS SUBMITTED FOR PUBLIC CONSULTATION<\/p>\n

CEN<\/b><\/p>\n

\u00a0<\/b><\/p>\n

Decree
\nperiod from 2019-06-01 to 2019-06-30<\/p>\n

The data are
\ntaken from\u00a0Database<\/span>
\nPRICE.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Mark<\/span><\/b><\/p>\n<\/td>\n

\n

Name in English<\/span><\/b><\/p>\n<\/td>\n

\n

Originator<\/span><\/b><\/p>\n<\/td>\n

\n

Deadlines<\/span><\/b><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 27509<\/span><\/p>\n<\/td>\n

\n

Petroleum and natural gas
\nindustries - Compact flanged connections with IX seal ring (ISO\/DIS
\n27509:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 12<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 12604:2017\/prA1<\/span><\/p>\n<\/td>\n

\n

Industrial, commercial and
\ngarage doors and gates - Mechanical aspects - Requirements and test methods<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 33<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 12453:2017\/prA1<\/span><\/p>\n<\/td>\n

\n

Industrial, commercial and
\ngarage doors and gates - Safety in use of power operated doors - Requirements
\nand test methods<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 33<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 28399<\/span><\/p>\n<\/td>\n

\n

Dentistry - Products for
\nexternal tooth bleaching (ISO\/DIS 28399:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 55<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 7787-2<\/span><\/p>\n<\/td>\n

\n

Dentistry - Laboratory cutters -
\nPart 2: Carbide laboratory cutters (ISO\/DIS 7787-2:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 55<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 15883-5<\/span><\/p>\n<\/td>\n

\n

Washer disinfectors - Part 5:
\nPerformance requirements and test method criteria for demonstrating cleaning
\nefficacy (ISO\/DIS 15883-5:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 102<\/span><\/p>\n<\/td>\n

\n

2019-09-02<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-3<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 3: Compression fittings for use with plastics and
\nmultilayer pipes<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-2<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 2: Compression fittings for use with copper tubes<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-1<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 1: Capillary fittings for soldering or brazing to
\ncopper tubes<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-6<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 6: Push-fit fittings for use with metallic tubes,
\nplastics and multilayer pipes<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-8<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 8: Press fittings for use with plastics and
\nmultilayer pipes<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-7<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 7: Press fittings for use with metallic tubes<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-4<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 4: Threaded fittings<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-5<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 5: Capillary fittings with short ends for brazing to
\ncopper tubes<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1254-20<\/span><\/p>\n<\/td>\n

\n

Copper and copper alloys -
\nPlumbing fittings - Part 20: Definitions, thread dimensions, test methods,
\nreference data and supporting information<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 133<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1816<\/span><\/p>\n<\/td>\n

\n

Resilient floor coverings -
\nSpecification for homogeneous and heterogeneous smooth rubber floor coverings
\nwith foam backing<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 134<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 1817<\/span><\/p>\n<\/td>\n

\n

Resilient floor coverings -
\nSpecification for homogeneous and heterogeneous smooth rubber floor coverings<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 134<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 12199<\/span><\/p>\n<\/td>\n

\n

Resilient floor coverings -
\nSpecifications for homogeneous and heterogeneous relief rubber floor
\ncoverings<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 134<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17396<\/span><\/p>\n<\/td>\n

\n

Resilient floor coverings -
\nQuartz vinyl tiles - Specification<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 134<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 13523-18<\/span><\/p>\n<\/td>\n

\n

Coil coated metals - Test
\nmethods - Part 18: Resistance to staining<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 139<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 13523-6<\/span><\/p>\n<\/td>\n

\n

Coil coated metals - Test
\nmethods - Part 6: Adhesion after indentation (cupping test)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 139<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 13523-20<\/span><\/p>\n<\/td>\n

\n

Coil coated metals - Test
\nmethods - Part 20: Foam adhesion<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 139<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 13001-2<\/span><\/p>\n<\/td>\n

\n

Crane safety - General design -
\nPart 2: Load actions<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 147<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 11298-4<\/span><\/p>\n<\/td>\n

\n

Plastics piping systems for
\nrenovation of underground water supply networks - Part 4: Lining with
\ncured-in-place pipes (ISO\/DIS 11298-4:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 155<\/span><\/p>\n<\/td>\n

\n

2019-09-04<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 23856<\/span><\/p>\n<\/td>\n

\n

Plastics piping systems for
\npressure and non-pressure water supply, drainage or sewerage -
\nGlass-reinforced thermosetting plastics (GRP) systems based on unsaturated
\npolyester (UP) resin (ISO\/DIS 23856:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 155<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 15004-1<\/span><\/p>\n<\/td>\n

\n

Ophthalmic instruments -
\nFundamental requirements and test methods - Part 1: General requirements
\napplicable to all ophthalmic instruments (ISO\/DIS 15004-1:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 170<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 8624<\/span><\/p>\n<\/td>\n

\n

Ophthalmic optics - Spectacle
\nFrames - Measuring system and terminology (ISO\/DIS 8624:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 170<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 8062-3<\/span><\/p>\n<\/td>\n

\n

Geometrical product
\nspecifications (GPS) - Dimensional and geometrical tolerances for moulded
\nparts - Part 3: General dimensional and geometrical tolerances and machining
\nallowances for castings (ISO\/DIS 8062-3:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 190<\/span><\/p>\n<\/td>\n

\n

2019-09-10<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 14972-3<\/span><\/p>\n<\/td>\n

\n

Fixed firefighting systems -
\nWater mist systems - Part 3: Test protocol for office, school and hotel for
\nautomatic nozzle systems<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 191<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 15004-5<\/span><\/p>\n<\/td>\n

\n

Fixed firefighting systems - Gas
\nextinguishing systems - Part 5: Physical properties and system design of gas
\nextinguishing systems for HFC 227ea extinguishant (ISO 15420-9:2016,
\nmodified)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 191<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 15004-4<\/span><\/p>\n<\/td>\n

\n

Fixed firefighting systems - Gas
\nextinguishing systems - Part 4: Physical properties and system design of gas
\nextinguishing systems for HFC 125 extinguishant (ISO 14520-8:2016, modified)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 191<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 15004-6<\/span><\/p>\n<\/td>\n

\n

Fixed firefighting systems - Gas
\nextinguishing systems - Part 6: Physical properties and system design of gas
\nextinguishing systems for HFC 23 extinguishant (ISO 14520-10:2016, modified)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 191<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 15004-2<\/span><\/p>\n<\/td>\n

\n

Fixed firefighting systems - Gas
\nextinguishing systems - Part 2: Physical properties and system design of gas
\nextinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5:2016,
\nmodified)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 191<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17407<\/span><\/p>\n<\/td>\n

\n

Portable equipment for
\nprojecting extinguishing agents supplied by firefighting pumps - Collecting
\nheads and dividing breechings PN16<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 192<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17408<\/span><\/p>\n<\/td>\n

\n

Determination of the flowability
\nand application behaviour of viscoelastic adhesives using the oscillatory
\nrheometry<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 193<\/span><\/p>\n<\/td>\n

\n

2019-09-12<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 23062<\/span><\/p>\n<\/td>\n

\n

Foundry machinery - Safety
\nrequirements for moulding and coremaking machinery and associated equipment
\n(ISO\/DIS 23062:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 202<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN ISO 11737-1:2018\/prA1<\/span><\/p>\n<\/td>\n

\n

Sterilization of health care
\nproducts - Microbiological methods - Part 1: Determination of a population of
\nMicroorganisms on products - Amendment 1 (ISO 11737-1:2018\/DAM 1:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 204<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17191<\/span><\/p>\n<\/td>\n

\n

Children\u00b4s Furniture - Seating
\nfor children - Safety requirements and test methods<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 207<\/span><\/p>\n<\/td>\n

\n

2019-09-12<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 389-7<\/span><\/p>\n<\/td>\n

\n

Acoustics - Reference zero for
\nthe calibration of audiometric equipment - Part 7: Reference threshold of
\nhearing under free-field and diffuse-field listening conditions (ISO\/DIS
\n389-7:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 211<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 23372<\/span><\/p>\n<\/td>\n

\n

Respiratory therapy equipment:
\nAir entrainment devices (ISO\/DIS 23372:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 215<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 5667-1<\/span><\/p>\n<\/td>\n

\n

Water quality - Sampling - Part
\n1: Guidance on the design of sampling programmes and sampling techniques
\n(ISO\/DIS 5667-1:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 230<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 13164-1<\/span><\/p>\n<\/td>\n

\n

Water quality - Radon-222 - Part
\n1: General principles (ISO 13164-1:2013)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 230<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 13164-3<\/span><\/p>\n<\/td>\n

\n

Water quality - Radon-222 - Part
\n3: Test method using emanometry (ISO 13164-3:2013)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 230<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 13164-2<\/span><\/p>\n<\/td>\n

\n

Water quality - Radon-222 - Part
\n2: Test method using gamma-ray spectrometry (ISO 13164-2:2013)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 230<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 13164-4<\/span><\/p>\n<\/td>\n

\n

Water quality - Radon-222 - Part
\n4: Test method using two-phase liquid scintillation counting (ISO
\n13164-4:2015)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 230<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 13165-2<\/span><\/p>\n<\/td>\n

\n

Water quality - Radium-226 -
\nPart 2: Test method using emanometry (ISO 13165-2:2014)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 230<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 13165-1<\/span><\/p>\n<\/td>\n

\n

Water quality - Radium-226 -
\nPart 1: Test method using liquid scintillation counting (ISO 13165-1:2013)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 230<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 13165-3<\/span><\/p>\n<\/td>\n

\n

Water quality - Radium-226 -
\nPart 3: Test method using coprecipitation and gamma-spectrometry (ISO
\n13165-3:2016)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 230<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17393<\/span><\/p>\n<\/td>\n

\n

Thermal spraying - Tubular
\ncoating tensile test<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 240<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 20418-3<\/span><\/p>\n<\/td>\n

\n

Textiles - Qualitative and
\nquantitative proteomic analysis of some animal hair fibers - Part 3: Peptide
\ndetection using LC-MS without protein reduction (ISO\/DIS 20418-3:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 248<\/span><\/p>\n<\/td>\n

\n

2019-09-10<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17410<\/span><\/p>\n<\/td>\n

\n

Plastics - Controlled loop
\nrecycling of post-consumer (or post-use) PVC-U windows and doors<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 249<\/span><\/p>\n<\/td>\n

\n

2019-09-12<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 844<\/span><\/p>\n<\/td>\n

\n

Rigid cellular plastics -
\nDetermination of compression properties (ISO\/DIS 844:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 249<\/span><\/p>\n<\/td>\n

\n

2019-09-17<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 2440<\/span><\/p>\n<\/td>\n

\n

Flexible and rigid cellular
\nPolymeric materials - Accelerated ageing tests (ISO\/FDIS 2440:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 249<\/span><\/p>\n<\/td>\n

\n

2019-09-04<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 13231-2<\/span><\/p>\n<\/td>\n

\n

Railway applications - Track -
\nAcceptance of works - Part 2: Acceptance of reprofiling rails in plain line,
\nswitches, crossings and expansion devices<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 256<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17397-1<\/span><\/p>\n<\/td>\n

\n

Railway applications - Rail
\ndefects - Part 1: Rail defect management<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 256<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 11463<\/span><\/p>\n<\/td>\n

\n

Corrosion of metals and alloys -
\nEvaluation of pitting corrosion (ISO\/DIS 11463:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 262<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 13725<\/span><\/p>\n<\/td>\n

\n

Stationary source emissions -
\nDetermination of odour concentration by dynamic olfactometry and odour
\nemission rate from stationary sources<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 264<\/span><\/p>\n<\/td>\n

\n

2019-09-12<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 27587<\/span><\/p>\n<\/td>\n

\n

Leather - Chemical tests -
\nDetermination of the free formaldehyde in process auxiliaries (ISO\/DIS
\n27587:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 289<\/span><\/p>\n<\/td>\n

\n

2019-09-09<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 17131<\/span><\/p>\n<\/td>\n

\n

Leather - Identification of
\nleather with microscopy (ISO\/DIS 17131:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 289<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 2692<\/span><\/p>\n<\/td>\n

\n

Geometrical product
\nspecifications (GPS) - Geometrical tolerancing - Maximum material requirement
\n(MMR), least material requirement (LMR) and reciprocity requirement (RPR)
\n(ISO\/DIS 2692:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 290<\/span><\/p>\n<\/td>\n

\n

2019-08-26<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 20049-1<\/span><\/p>\n<\/td>\n

\n

Solid biofuels - Determination
\nof self-heating of pelletized biofuels - Part 1: Isothermal calorimetry
\n(ISO\/DIS 20049-1:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 335<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 16516:2017\/prA1<\/span><\/p>\n<\/td>\n

\n

Construction products:
\nAssessment of release of dangerous substances - Determination of emissions of
\ninto indoor air<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 351<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 17200<\/span><\/p>\n<\/td>\n

\n

Nanotechnology - Nanoparticles
\nin powder form - Characteristics and measurements (ISO\/DIS 17200:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 352<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 16524<\/span><\/p>\n<\/td>\n

\n

Mechanical products -
\nMethodology for reduction of environmental impacts in product design and
\ndevelopment<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 406<\/span><\/p>\n<\/td>\n

\n

2019-09-12<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17412<\/span><\/p>\n<\/td>\n

\n

Building Information Modelling -
\nLevel of Information Need - Concepts and principles<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 442<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 17399<\/span><\/p>\n<\/td>\n

\n

Algae and algaebased products or
\nintermediates - Terms and definitions<\/span><\/p>\n<\/td>\n

\n

CEN\/TC 454<\/span><\/p>\n<\/td>\n

\n

2019-09-05<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 128-1<\/span><\/p>\n<\/td>\n

\n

Technical product documentation
\n(TPD) - General principles of representation - Part 1: Introduction and
\nfundamental requirements (ISO\/DIS 128-1:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/SS F01<\/span><\/p>\n<\/td>\n

\n

2019-08-27<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 128-100<\/span><\/p>\n<\/td>\n

\n

Technical product documentation
\n- General principles of representation - Part 100: Index (ISO\/DIS
\n128-100:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/SS F01<\/span><\/p>\n<\/td>\n

\n

2019-09-12<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 9093<\/span><\/p>\n<\/td>\n

\n

Small craft - Seacocks and
\nthrough-hull fittings (ISO\/DIS 9093:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/SS T01<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO 8848<\/span><\/p>\n<\/td>\n

\n

Small craft - Remote steering
\nsystems (ISO\/DIS 8848:2019)<\/span><\/p>\n<\/td>\n

\n

CEN\/SS T01<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 10371<\/span><\/p>\n<\/td>\n

\n

Metallic materials - Small punch
\ntest method<\/span><\/p>\n<\/td>\n

\n

PRICE\/TC 459\/SC 1<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 10369-1<\/span><\/p>\n<\/td>\n

\n

Prestressing steels - Protected
\nand sheathed strands for prestressing - Part 1: General requirements<\/span><\/p>\n<\/td>\n

\n

PRICE\/TC 459\/SC 4<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 10369-2<\/span><\/p>\n<\/td>\n

\n

Prestressing steels - Protected
\nand sheathed strands for prestressing - Part 2: Sliding strands<\/span><\/p>\n<\/td>\n

\n

PRICE\/TC 459\/SC 4<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 10370<\/span><\/p>\n<\/td>\n

\n

Steel for the reinforcement of
\nconcrete - Stainless steel<\/span><\/p>\n<\/td>\n

\n

PRICE\/TC 459\/SC 4<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 10369-3<\/span><\/p>\n<\/td>\n

\n

Prestressing steels - Protected
\nand sheathed strands for prestressing - Part 3: Adherent strands<\/span><\/p>\n<\/td>\n

\n

PRICE\/TC 459\/SC 4<\/span><\/p>\n<\/td>\n

\n

2019-08-29<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN ISO\/IEC 27000<\/span><\/p>\n<\/td>\n

\n

Information technology -
\nSecurity techniques - Information security management systems - Overview and
\nvocabulary (ISO\/IEC 27000:2018)<\/span><\/p>\n<\/td>\n

\n

CEN\/CLC\/JTC 13<\/span><\/p>\n<\/td>\n

\n

2019-09-19<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Czech Agency for
\nstandardization<\/p>\n

Director of the Standardisation Department<\/p>\n

Zde\u0148ka Slan\u00e1<\/b> v. r.<\/p>\n

\u00a0<\/b><\/p>\n

\u00a0<\/b><\/p>\n

\u00a0<\/b><\/p>\n

NOTICE No 76\/19<\/b><\/p>\n

of the Office for
\ntechnical standardisation, metrology and state testing<\/b><\/p>\n

on the public hearing on the proposals
\nEuropean standards CENELEC<\/p>\n

Office of Technical
\nStandardisation, Metrology and State Testing
\n<\/span>submits pursuant to Section 6 of Act No. 22\/1997
\nColl. for public consultation the following draft standards of the European Committee for
\nElectrotechnical Standardization (CENELEC)<\/span>.<\/p>\n

On these proposals
\nconsidered as draft CSNs can be submitted by anyone, no later than 2 weeks before the relevant
\nby the deadline indicated below for each item, to submit comments to<\/p>\n

Czech Agency for
\nStandardization,<\/p>\n

state contributory
\norganization,<\/p>\n

Bishop's Court
\n1148\/5, 110 00\u00a0 <\/span>Prague 1<\/p>\n

E-mail: normalizace@agenturacas.gov.cz<\/p>\n

Tel: 221 802 111<\/p>\n

These proposals are
\navailable from the Customer Centre of the Czech Standards Agency,<\/p>\n

state contributory
\norganization,<\/p>\n

Bishop's Court
\n1148\/5, 110 00\u00a0 <\/span>Prague 1.<\/p>\n

\u00a0<\/span><\/p>\n

Most of these proposals can be read and
\ncomment at http:\/\/drafts.unmz.cz\/<\/span><\/p>\n

DRAFT EUROPEAN STANDARDS SUBMITTED FOR PUBLIC
\nTHE SESSION<\/p>\n

CENELEC<\/b><\/p>\n

Decree
\nperiod from 2019-06-01 to 2019-06-30<\/p>\n

The data are
\ntaken from\u00a0Database<\/span>
\nCENELEC.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Mark<\/span><\/b><\/p>\n<\/td>\n

\n

Name in English<\/span><\/b><\/p>\n<\/td>\n

\n

Originator<\/span><\/b><\/p>\n<\/td>\n

\n

Deadlines<\/span><\/b><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 62485-6:2019<\/span><\/p>\n<\/td>\n

\n

Safety requirements for
\nsecondary batteries and battery installations - Part 5: Safe operation of
\nlithium-ion batteries in traction applications<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 21X<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 62485-5:2019<\/span><\/p>\n<\/td>\n

\n

Safety requirements for
\nsecondary batteries and battery installations - Part 5: Safe operation of
\nstationary lithium-ion batteries<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 21X<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 55014-1:2017\/prA1 (fragment
\n1):2019<\/span><\/p>\n<\/td>\n

\n

Electromagnetic compatibility -
\nRequirements for household appliances, electric tools and similar apparatus -
\nPart 1: Emission<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 210<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 62149-11:2019<\/span><\/p>\n<\/td>\n

\n

Fibre optic active components
\nand devices - Performance standards - Part 11: Multiple channel
\ntransmitter\/receiver chip scale package with multimode fibre interface<\/span><\/p>\n<\/td>\n

\n

CLC\/SR 86C<\/span><\/p>\n<\/td>\n

\n

2019-09-13<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 55014-1:2017\/prA1 {fragment
\n4}:2019<\/span><\/p>\n<\/td>\n

\n

Electromagnetic compatibility -
\nRequirements for household appliances, electric tools and similar apparatus -
\nPart 1: Emission<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 210<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 60598-1:2015\/prA2:2019<\/span><\/p>\n<\/td>\n

\n

Luminaires - Part 1: General
\nrequirements and tests<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 34<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 63045:2019<\/span><\/p>\n<\/td>\n

\n

Ultrasonics - Non-focusing and
\nweakly focusing pressure pulse sources - Characteristics of fields<\/span><\/p>\n<\/td>\n

\n

CLC\/SR 87<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 61189-5-504:2019<\/span><\/p>\n<\/td>\n

\n

Test methods for electrical
\nmaterials, printed boards and other interconnection structures and assemblies
\n- Part 5-504: General test methods for materials and assemblies - Pocess
\nionic contamination testing (PICT)<\/span><\/p>\n<\/td>\n

\n

CLC\/SR 91<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 63115-2:2019<\/span><\/p>\n<\/td>\n

\n

Secondary cells and batteries
\ncontaining alkaline or other non-acid electrolytes - Sealed nickel-metal
\nhydride rechargeable cells and modules for use in industrial applications -
\nPart 2: Safety<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 21X<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 55014-2:2015\/prA1 {fragment
\n3}:2019<\/span><\/p>\n<\/td>\n

\n

Electromagnetic compatibility -
\nRequirements for household appliances, electric tools and similar apparatus -
\nPart 2: Immunity - Product family standard<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 210<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 62610-6:2019<\/span><\/p>\n<\/td>\n

\n

Mechanical structures for
\nelectrical and electronic equipment - Thermal management for cabinets in
\naccording with IEC 60297 and IEC 60917 Series - Part 6: Air recirculation
\nand bypass of indoor cabinets<\/span><\/p>\n<\/td>\n

\n

CLC\/SR 48D<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 61788-26:2019<\/span><\/p>\n<\/td>\n

\n

Superconductivity - Part 26:
\nCritical current measurement - DC critical current of RE-Ba-Cu-O composite
\nsuperconductors<\/span><\/p>\n<\/td>\n

\n

CLC\/SR 90<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 60335-2-40<\/span><\/p>\n<\/td>\n

\n

Household and similar electrical
\nappliances - Safety - Part 2-40: Particular requirements for electrical heat
\npumps, air-conditioners and dehumidifiers<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 61<\/span><\/p>\n<\/td>\n

\n

2019-09-13<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN IEC 61000-3-2:2019\/prA1:2019
\n{fragment 1}<\/span><\/p>\n<\/td>\n

\n

Electromagnetic compatibility
\n(EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment
\ninput current \u2264 16 A per phase)<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 210<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 50083-2:2012\/prA2<\/span><\/p>\n<\/td>\n

\n

Cable networks for television
\nsignals, sound signals and interactive services - Part 2: Electromagnetic
\ncompatibility for equipment<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 209<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 62973-2:2019<\/span><\/p>\n<\/td>\n

\n

Railway applications - Batteries
\nfor auxiliary power supply systems - Part 2: Nickel Cadmium (NiCd) batteries<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 9X<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 61472-2:2019<\/span><\/p>\n<\/td>\n

\n

Live working - Minimum approach
\ndistances - Part 2: A method of determination for AC system 1,0 to 72,5 kV<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 78<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 63180:2019<\/span><\/p>\n<\/td>\n

\n

Methodology for determining the
\nfunctionality of detectors - Part 1: Passive infra-red detectors for presence
\nand motion detection<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 23BX<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 60317-0-6:2019<\/span><\/p>\n<\/td>\n

\n

Specifications for particular
\ntypes of winding wires - Part 0-6: General requirements - Glass-fibre wound
\nresin or varnish impregnated, bare or enamelled round copper wire<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 55<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 50401:2017\/prA1<\/span><\/p>\n<\/td>\n

\n

Product standard to demonstrate
\nthe compliance of base station equipment with radiofrequency electromagnetic
\nfield exposure limits (110 MHz - 100 GHz), when put into service<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 106X<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 63181-2:2019<\/span><\/p>\n<\/td>\n

\n

LCD multi-screen display
\nterminals - Part 2: Measuring methods<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 100X<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 61753-061-2:2019<\/span><\/p>\n<\/td>\n

\n

Fibre optic interconnecting
\ndevices and passive components - Performance standard - Part 061-2:
\nSingle-mode fibre optic pigtailed style polarization independent isolators
\nfor category C - Controlled environments<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 86BXA<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 61977:2019<\/span><\/p>\n<\/td>\n

\n

Fibre optic interconnecting
\ndevices and passive components - Fibre optic fixed filters - Generic
\nspecification<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 86BXA<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 62148-6:2019<\/span><\/p>\n<\/td>\n

\n

Fibre optic active components
\nand devices - Package and interface standards - Part 6: ATM-PON transceivers<\/span><\/p>\n<\/td>\n

\n

CLC\/SR 86C<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN 50377-14-1<\/span><\/p>\n<\/td>\n

\n

Connector sets and interconnect
\ncomponents to be used in optical fibre communication systems - Product
\nspecifications Part 14-1: Simplex and duplex cords made from simplex plugs
\nwith cylindrical ferrules, using EN 60793-2-50 single-mode B1 or B6 fibre for
\nCategory C according to EN 61753 1<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 86BXA<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

FprEN IEC 60215:201X\/prAA<\/span><\/p>\n<\/td>\n

\n

Safety requirements for radio
\ntransmitting equipment - General requirements and terminology<\/span><\/p>\n<\/td>\n

\n

CLC\/SR 103<\/span><\/p>\n<\/td>\n

\n

2019-09-06<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 62401<\/span><\/p>\n<\/td>\n

\n

Radiation protection
\ninstrumentation - Alarming personal radiation devices (PRDs) for the
\ndetection of illicit trafficking of radioactive material<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 45B<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 62327<\/span><\/p>\n<\/td>\n

\n

Radiation protection
\ninstrumentation - Hand-held instruments for the detection and identification
\nof radionuclides and for the estimation of ambient dose equivalent rate from
\nphoton radiation<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 45B<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 50131-1:2006\/prA3:2019<\/span><\/p>\n<\/td>\n

\n

Alarm systems - Intrusion and
\nhold-up systems - Part 1: System requirements<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 79<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN IEC 61300-2-4:2019\/prA1:2019<\/span><\/p>\n<\/td>\n

\n

Fibre optic interconnecting
\ndevices and passive components - Basic test and measurement procedures - Part
\n2-4: Tests - Fibre or cable retentio<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 86BXA<\/span><\/p>\n<\/td>\n

\n

2019-09-13<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

FprEN 60335-2-36:2017\/prA11:2019<\/span><\/p>\n<\/td>\n

\n

Household and similar electrical
\nappliances - Safety - Part 2-36: Particular requirements for commercial
\nelectric cooking ranges, ovens, hobs and hob elements<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 61<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 61225<\/span><\/p>\n<\/td>\n

\n

Nuclear power plants -
\nInstrumentation, control and electrical power systems - Requirements for
\nstatic uninterruptible DC and AC power supply systems<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 45AX<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 62841-4-4:2019<\/span><\/p>\n<\/td>\n

\n

Electric motor-operated
\nhand-held tools, transportable tools and lawn and garden machinery - Safety -
\nPart 4-4: Particular requirements for lawn trimmers, lawn edge trimmers,
\ngrass trimmers, brush cutters and brush saws<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 116<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 62841-4-4:2019\/prAA:2019<\/span><\/p>\n<\/td>\n

\n

Electric motor-operated
\nhand-held tools, transportable tools and lawn and garden machinery - Safety -
\nPart 4-4: Particular requirements for lawn trimmers, lawn edge trimmers,
\ngrass trimmers, brush cutters and brush saws<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 116<\/span><\/p>\n<\/td>\n

\n

2019-08-30<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

EN 55014-1:2017\/prA1 {fragment
\n5}:2019<\/span><\/p>\n<\/td>\n

\n

Electromagnetic compatibility -
\nRequirements for household appliances, electric tools and similar apparatus -
\nPart 1: Emission<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 210<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

prEN IEC 63247-1:2019<\/span><\/p>\n<\/td>\n

\n

Live working - Part 1: Footwear
\nfor electrical protection - Insulating footwear and overboots<\/span><\/p>\n<\/td>\n

\n

CLC\/TC 78<\/span><\/p>\n<\/td>\n

\n

2019-09-20<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/span><\/p>\n

\u00a0<\/span><\/p>\n

Czech Agency for
\nstandardization<\/p>\n

Director of the Standardisation Department<\/p>\n

Zde\u0148ka Slan\u00e1<\/b> v. r.<\/p>\n

\u00a0<\/b><\/p>\n

NOTICE No 77\/19<\/b><\/p>\n

Office for Technical Standardization,
\nmetrology and state testing<\/b><\/p>\n

on public
\ndiscussion of draft European telecommunications standards<\/p>\n

Office of Technical
\nStandardisation, Metrology and State Testing
\n<\/span>submits pursuant to Section 6 of Act No. 22\/1997
\nColl. for public consultation the following draft ETSI standards -<\/span>
\nEuropean Telecommunications Standards Institute.<\/p>\n

On these proposals
\nconsidered to be draft CSNs, anyone may submit comments in the timeframe set out below
\ndeadline at<\/p>\n

Czech Agency for
\nStandardization,<\/p>\n

state contributory
\norganization,<\/p>\n

Bishop's Court
\n1148\/5, 110 00\u00a0 <\/span>Prague 1<\/p>\n

E-mail: normalizace@agenturacas.gov.cz<\/p>\n

Tel: 221 802 111<\/p>\n

These proposals are
\navailable from the Customer Centre of the Czech Standards Agency,<\/p>\n

state contributory
\norganization,<\/p>\n

Bishop's Court
\n1148\/5, 110 00\u00a0 <\/span>Prague 1.<\/p>\n

\u00a0<\/span><\/p>\n

Most of these proposals can be read and
\ncomment at http:\/\/drafts.unmz.cz\/<\/span><\/p>\n

DRAFT EUROPEAN STANDARDS SUBMITTED FOR PUBLIC CONSULTATION<\/span><\/p>\n

ETSI<\/span><\/b><\/p>\n

in the period from 2019-06-01 to 2019-06-30<\/span><\/p>\n

\u00a0<\/span><\/p>\n\n\n\n\n\n
\n

Edition: AP
\n20190917<\/b><\/p>\n<\/td>\n

\n

Deadline
\nComments: 2019-09-17<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Document marking<\/p>\n

ETSI Schedule item designation<\/p>\n

Working Group (WG)<\/p>\n<\/td>\n

\n

\n<\/td>\n<\/tr>\n

\n

ETSI EN 301 549 V3.1.1<\/p>\n

REN\/HF-00301549v311<\/p>\n

HF<\/p>\n<\/td>\n

\n

Accessibility requirements for ICT products and services<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Czech Agency for
\nstandardization<\/p>\n

Director of the Standardisation Department<\/p>\n

Zde\u0148ka Slan\u00e1<\/b> v. r.<\/p>\n

<\/a><\/p>\n<\/div>\n

 <\/p>\n

 <\/p>","protected":false},"excerpt":{"rendered":"

Odd\u00edl 2. \u010cesk\u00e9 technick\u00e9 normy \u00a0OZN\u00c1MEN\u00cd \u010d. 71\/19 \u00da\u0159adu pro technickou normalizaci, metrologii a st\u00e1tn\u00ed zku\u0161ebnictv\u00ed o vyd\u00e1n\u00ed \u010cSN, jejich zm\u011bn, oprav a zru\u0161en\u00ed \u00da\u0159ad pro technickou normalizaci, metrologii a st\u00e1tn\u00ed zku\u0161ebnictv\u00ed podle \u00a7 4 z\u00e1kona \u010d. 22\/1997 Sb. oznamuje, \u017ee byly vyd\u00e1ny, zm\u011bn\u011bny, opraveny nebo zru\u0161eny d\u00e1le uveden\u00e9 \u010cSN. Po\u010d\u00e1tek platnosti \u010cSN, jejich zm\u011bn […]<\/p>\n","protected":false},"author":7,"featured_media":0,"parent":859,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"_seopress_robots_primary_cat":"","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","_lmt_disableupdate":"","_lmt_disable":"","footnotes":""},"class_list":["post-1034","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/unmz.gov.cz\/en\/wp-json\/wp\/v2\/pages\/1034","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/unmz.gov.cz\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/unmz.gov.cz\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/unmz.gov.cz\/en\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/unmz.gov.cz\/en\/wp-json\/wp\/v2\/comments?post=1034"}],"version-history":[{"count":0,"href":"https:\/\/unmz.gov.cz\/en\/wp-json\/wp\/v2\/pages\/1034\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/unmz.gov.cz\/en\/wp-json\/wp\/v2\/pages\/859"}],"wp:attachment":[{"href":"https:\/\/unmz.gov.cz\/en\/wp-json\/wp\/v2\/media?parent=1034"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}